Ads
related to: antenna receiver map
Search results
Results From The WOW.Com Content Network
Line of sight (LoS) propagation from an antenna. Line-of-sight propagation is a characteristic of electromagnetic radiation or acoustic wave propagation which means waves can only travel in a direct visual path from the source to the receiver without obstacles. [1] Electromagnetic transmission includes light emissions traveling in a straight line.
Antennas are generally sensitive to signals only when they have a length that is a significant portion of the wavelength, or larger. Most antennas are at least 1 ⁄ 4 of the wavelength, more commonly 1 ⁄ 2 – the half-wave dipole is a very common design. For longwave use, this resulted in loop antennas tens of feet on a side, often with ...
Patch antenna gain pattern. A directional antenna or beam antenna is an antenna which radiates or receives greater radio wave power in specific directions. Directional antennas can radiate radio waves in beams, when greater concentration of radiation in a certain direction is desired, or in receiving antennas receive radio waves from one specific direction only.
Flexible steel tape enables the antenna elements to flex and not break when encountering vegetation in the forest. On the eighty meter band, two common receiver design approaches are to use either a small loop antenna or an even smaller loop antenna wound around a ferrite rod. These antennas have a bidirectional receiving pattern, with two peak ...
The operator simply finds on the map the location of the target transmitter or receiver (i.e. the other antenna being communicated with) and uses the map to determine the azimuth angle needed to point the operator's antenna. The operator would use an electric rotator to point the antenna. The map can also be used in one way communication.
The receiving antenna height of 10m dates from the 1950s when receivers were relatively insensitive and used rooftop antennas. Although this may seem unrealistic for typical situations today, when combined with the above threshold it is considered a good proxy for providing coverage to more sensitive modern receivers used without external ...
An antenna lead-in is the transmission line, or feed line, which connects the antenna to a transmitter or receiver. The "antenna feed" may refer to all components connecting the antenna to the transmitter or receiver, such as an impedance matching network in addition to the transmission line. In a so-called "aperture antenna", such as a horn or ...
The operator tunes the ADF receiver to the correct frequency and verifies the identity of the beacon by listening to the Morse code signal transmitted by the NDB. [5] On marine ADF receivers, the motorized ferrite-bar antenna atop the unit (or remotely mounted on the masthead) would rotate and lock when reaching the null of the desired station.