Search results
Results From The WOW.Com Content Network
Diagram of cylinder and piston valve. The valve is next opened by moving it to the right, allowing the clear space in the middle of the valve to align with the channel in the cylinder above it. Piston valves are one form of valve used to control the flow of steam within a steam engine or locomotive.
Collects steam at the top of the boiler (well above the water level) so that it can be fed to the engine via the main steam pipe, or dry pipe, and the regulator/throttle valve. [2] [5] [6]: 211–212 [3]: 26 Air pump / Air compressor Westinghouse pump (US+) Powered by steam, it compresses air for operating the train air brake system.
The NMRA published alternative, more accurate and realistic standards for track and wheels sheet in S-1.1 These model railway standards are based on the full size prototype standards and the scale model operational reliability is therefore reduced in comparison to the models conforming to the normal NMRA standards.
A live steam festival (often called a "Steam Fair" in the UK and a live steam "meet" in the US) is a gathering of people interested in steam engine technology. Locomotives, trains, traction engines , steam wagons , steam rollers , showman's engines and tractors , steam boats and cars , and stationary steam engines may be on display, both full ...
The steam locomotive, as commonly employed, has its pistons directly attached to cranks on the driving wheels; thus, there is no gearing, one revolution of the driving wheels is equivalent to one revolution of the crank and thus two power strokes per piston (steam locomotives are almost universally double-acting, unlike the more familiar internal combustion engine).
Over time, Mamod expanded its range to include models of road rollers, traction engines, steam wagons, steam locomotives and other steam-powered road vehicles. These models were primarily intended for the toy market and were designed to be user-friendly and operate at low boiler pressures for safety, although they were not precise scale models .
Typical horizontal steam engine with double-acting cylinder. A double-acting cylinder is a cylinder in which the working fluid acts alternately on both sides of the piston. . In order to connect the piston in a double-acting cylinder to an external mechanism, such as a crank shaft, a hole must be provided in one end of the cylinder for the piston rod, and this is fitted with a gland or ...
The cylinder is made pressure-tight with end covers and a piston; a valve distributes the steam to the ends of the cylinder. Cylinders were initially cast iron , but later made of steel . The cylinder casting includes other features such as (in the case of Stephenson's Rocket ) valve ports and mounting feet. [ 1 ]