Ads
related to: long thin wood strips
Search results
Results From The WOW.Com Content Network
To draw curves, especially for shipbuilding, draftsmen often used long, thin, flexible strips of wood, plastic, or metal called splines (or laths, not to be confused with lathes). [1] The splines were held in place with lead weights (called ducks because of their duck -like shape).
Vertical, metal furring is applied to the wall to create a channel and receive the siding material. In construction, furring (furring strips) are strips of wood or other material applied to a structure to level or raise the surface, to prevent dampness, to make space for insulation, to level and resurface ceilings or walls, [1] or to increase the beam of a wooden ship.
Tack strip being removed from a floor. Tack strip also known as gripper rod, carpet gripper, Smoothedge tackless strip, gripper strip or gripper edge is a thin piece of wood, between 1 and 2 metres (3.3 and 6.6 ft) long and about 3 centimetres (1.2 in) wide, studded with hundreds of sharp nails or tacks used in the installation of carpet.
The tendency for wood that is being cut to direct the saw parallel to its grain. lath. Also called a slat. A thin, narrow strip of straight-grained wood, typically arranged side-by-side with others and used to support roof shingles or tiles, as a backing material for plaster or stucco in walls and ceilings, or in lattice and trellis frameworks ...
Batten trim or batten molding is a thin strip of trim typically with a rectangular cross-section similar to lath used in lattice, used to cover seams between panels of exterior siding or interior paneling.
As it hits the wood, the knife blade creates a "loose" side where the cells have been opened up by the blade, and a "tight" side. Veneers are cut as thin as 0.64 mm (1 ⁄ 40 in). Depending on the cutting process used by the veneer manufacturer, very little wood is wasted by the saw blade thickness, known as the saw kerf. Some manufacturers use ...