Search results
Results From The WOW.Com Content Network
A positive pressure enclosure, also known as a welding habitat or hot work habitat, is a chamber used to provide a safe working environment for performing hot work in the presence of explosive gases or vapors. They are commonly used in welding environments and are associated with the offshore oil industry. [1]
Most weld purging is carried out on joints made by the TIG or GTAW arc welding process. [6] When the laser welding process is chosen, joints or welds being made on reactive materials will need to be carried out and in the case of electron beam welding, this is carried out in a vacuum, in which case purging takes place by complete evacuation of all gas.
A set of MAPP and oxygen cylinders is used for oxy-fuel welding and cutting.. MAPP gas was a trademarked name, belonging to The Linde Group, a division of the former global chemical giant Union Carbide, for a fuel gas based on a stabilized mixture of methylacetylene (propyne), propadiene and propane.
Further, more of it can be stored in a single place at one time, as the increased compressibility allows for more gas to be put into a tank. MAPP gas can be used at much higher pressures than acetylene, sometimes up to 40 or 50 psi in high-volume oxy-fuel cutting torches which can cut up to 12-inch-thick (300 mm) steel.
A DOT-111 tank car, specification 111A100W1, constructed by fusion welding carbon steel.This car has a capacity of 30,110 US gallons (113,979 L; 25,071.8 imp gal), a test pressure of 100 psi (690 kPa), a tare weight of 65,000 pounds (29,500 kg) and a load limit of 198,000 pounds (89,800 kg).
The term cylinder in this context is sometimes confused with tank, the latter being an open-top or vented container that stores liquids under gravity, though the term scuba tank is commonly used to refer to a compressed gas cylinder used for breathing gas supply to an underwater breathing apparatus.
The most common diesel tank designs are cylindrical, rectangular and D-Style tanks. Cylindrical designs are often selected for their visual appeal while the rectangular tank is most often employed to maximize fuel volume for a given space. The D-Tank, as its name implies, is actually a hybrid of the cylindrical and rectangular designs.
In the 1930s metallurgists Albert Portevin and D. Seferian attempted to experimentally determine heat transfer characteristics in welding. [1] They correlated the effects of several factors—material properties, welding process, and part dimensions—on temperature distribution, by performing oxyacetylene (gas) and covered electrode (arc) welds on plates and bars of various profiles, and ...