Search results
Results From The WOW.Com Content Network
Pebbledash Pebbledashing Rock dash stucco. Roughcast or pebbledash is a durable coarse plaster surface used on outside walls that consists of lime and sometimes cement mixed with sand, small gravel and often pebbles or shells. [1]
The sheen [4] or gloss level of a paint is principally determined by the ratio of resinous, adhesive binder, which solidifies after drying, and solid, powdery pigment.The more binder the coating contains, the more regular reflection will be made from its smooth surface; conversely, with less binder, grains of pigment become exposed to the surface, scattering the light and providing matte ...
“Eggshell provides a soft, low-sheen finish that is subtle and smooth, similar to the surface of an eggshell,” she adds. “On the other hand, satin is a bit more glossy, resulting in a smooth ...
As a building material, stucco is a durable, attractive, and weather-resistant wall covering. It was traditionally used as both an interior and exterior finish applied in one or two thin layers directly over a solid masonry, brick, or stone surface. The finish coat usually contained an integral color and was typically textured for appearance.
In modern techniques, lacquer means a range of clear or pigmented coatings that dry by solvent evaporation to produce a hard, durable finish. The finish can be of any sheen level from ultra matte to high gloss, and it can be further polished as required. Lacquer finishes are usually harder and more brittle than oil-based or latex paints and are ...
A collection of gemstone pebbles. Most of these stones, except four rough ones, were tumbled and polished. Tumbling of rocks as a lapidary technique for rock polishing usually requires a plastic or rubber-lined barrel loaded with a consignment of rocks, all of similar or the same hardness, some abrasive grit, and a liquid lubricant.
Some professionally applied finishes in the high-end, Bay-Area homes of northern California, for example, were as simple as oil glaze, oil-based paint or penetrol or as complicated as applications with peacock feathers and 4 different colors applied using 4 different techniques. In modern-day faux finishing, there are two major processes used.
Polished plaster is mainly used internally, on walls and ceilings, [3] to give a finish that looks like polished marble, travertine, or limestone. Such plasters are usually applied over a primer and basecoat base, from one to four layers. They are finished with a specialised steel trowel to a smooth glass-like sheen. Polished plaster is usually ...