Ads
related to: truck wheel dimensions explained
Search results
Results From The WOW.Com Content Network
Wheels with Asanti 28 in (710 mm) rims on a police Hummer H2 car. The wheel size is the size designation of a wheel given by its diameter, width, and offset. The diameter of the wheel is the diameter of the cylindrical surface on which the tire bead rides. The width is the inside distance between the bead seat faces.
This means: If only the front wheels are steered, the rearmost part of the formula can be left out. The most common example is probably the 4×4 configuration. 6×4*4 is the chassis configuration for a vehicle with six wheels where four wheels are driven, in addition, the two front wheels as well as the rearmost two wheels are steered.
There is the rare exception of metric-diameter tires, such as the use of the 390 size, which in this case would indicate a rim of 390 mm in diameter. Few tires are made to this size currently. The number may be longer where a half-inch size is used, for example many heavy transport trucks now use 22.5-inch tires. [7] [8]
For road vehicles with more than two axles (e.g. some trucks), the wheelbase is the distance between the steering (front) axle and the centerpoint of the driving axle group. In the case of a tri-axle truck, the wheelbase would be the distance between the steering axle and a point midway between the two rear axles. [1]
The M35 started as a 1949 REO Motor Car Company design for a 2½-ton 6×6 off-road truck. This original 6-wheel M34 version with a single wheel tandem was quickly superseded by the 10-wheel M35 design with a dual tandem. The basic M35 cargo truck is rated to carry 5,000 pounds (2,300 kg) off-road or 10,000 pounds (4,500 kg) on roads.
An axlebox, also known as a journal box in North America, is the mechanical subassembly on each end of the axles under a railway wagon, coach or locomotive; it contains bearings and thus transfers the wagon, coach or locomotive weight to the wheels and rails; the bearing design is typically oil-bathed plain bearings on older rolling stock, or roller bearings on newer rolling stock.