Ads
related to: watt calculator with amperage chart for light bulbs
Search results
Results From The WOW.Com Content Network
For example, when a light bulb with a power rating of 100 W is turned on for one hour, the energy used is 100 watt hours (W·h), 0.1 kilowatt hour, or 360 kJ. This same amount of energy would light a 40-watt bulb for 2.5 hours, or a 50-watt bulb for 2 hours.
In direct current (DC) circuits, this product is equal to the real power, measured in watts. [3] The volt-ampere is dimensionally equivalent to the watt: in SI units, 1 V⋅A = 1 W. VA rating is most used for generators and transformers, and other power handling equipment, where loads may be reactive (inductive or capacitive).
For reference, about 10,000 100-watt lightbulbs or 5,000 computer systems would be needed to draw 1 MW. Also, 1 MW is approximately 1360 horsepower. Modern high-power diesel-electric locomotives typically have a peak power of 3–5 MW, while a typical modern nuclear power plant produces on the order of 500–2000 MW peak output.
Available in numerous spot and flood beam spreads. Like all light bulbs, the number represents the diameter of the bulb in 1 ⁄ 8 of an inch. Therefore, a PAR 16 is 51 mm (2 in) in diameter, a PAR 20 is 64 mm (2.5 in) in diameter, PAR 30 is 95 mm (3.75 in) and a PAR 38 is 121 mm (4.75 in) in diameter. A package of four 60-watt light bulbs
The length (sometimes also referred to as "height") of any two-ended cylindrical bulb must be specified separately from its form factor code, usually in millimeters, as must the lamp's voltage and wattage— hence, T3 120 V 150 W 118 mm means a double-ended tube-shaped bulb with a diameter of 9.5 mm (3 ⁄ 8 in) that operates at 120 V and is ...
The maximum power measured is the nominal power of the module in Watts. Colloquially, this is also written as "W p"; this format is colloquial as it is outside the standard by adding suffixes to standardized units. The nominal power divided by the light power that falls on the module (area x 1000 W/m 2) is the efficiency.