Ads
related to: audio tape thickness gauge conversion
Search results
Results From The WOW.Com Content Network
The first commonly available increase in tape length resulted from a reduction in backing thickness from 1.5 to 1.0 mil (38 to 25 μm) resulting in a total thickness reduction from 42 to 35 μm (1.7 to 1.4 mils), which allowed 3,600 ft (1,100 m), 1,800 ft (550 m), and 900 ft (270 m) tapes to fit on ten-and-a-half-, seven-, and five-inch reels respectively.
Digital Audio Tape (DAT or R-DAT) is a signal recording and playback medium developed by Sony and introduced in 1987. [1] In appearance it is similar to a Compact Cassette , using 3.81 mm / 0.15" (commonly referred to as 4 mm) magnetic tape enclosed in a protective shell, but is roughly half the size at 73 mm × 54 mm × 10.5 mm.
A reel-to-reel tape recorder (Sony TC-630), typical of a 1970s audiophile device. Reel-to-reel audio tape recording, also called open-reel recording, is magnetic tape audio recording in which the recording tape is spooled between reels. To prepare for use, the supply reel (or feed reel) containing the tape is placed on a spindle or hub.
DASH is capable of recording two channels of audio on a quarter-inch tape, and 24 or 48 tracks on 1 ⁄ 2-inch-wide (13 mm) tape [1] [2] [3] on open reels of up to 14 inches. The data is recorded on the tape linearly, [ 4 ] with a stationary recording head , [ 5 ] as opposed to the DAT format, where data is recorded helically with a rotating ...
Audio cassette: Analog usually 30 (C-60) or 45 (C-90) minutes per side, 60 (C-120) minutes per side have also been sold although the tape is more prone to stretching or breaking. 8-Track: Analog up to 100 minutes, often 45 to 80 Reel-to-Reel: Analog 1.5 hours (both sides) if recorded at 7.5 inches per second (ips) on a standard 1800 ft reel.
Remanence of audio tapes, referred to quarter-inch tape width, varies from around 1100 G for basic ferric tapes to 3500 G for Type IV tapes; [5] advertised remanence of the 1986 JVC Type IV cassette reached 4800 G. [6] Coercivity is a measure of the external magnetic flux required to magnetize the tape, and an indicator of the necessary bias level.
Cassette tape, a two-spool tape cassette format for analog audio recording and playback and introduced in 1963 by Philips; DC-International, a format that was created by Grundig after Phillips had abandoned an earlier format that was being created alongside the Compact Cassette; 8-track tape, continuous loop tape system introduced in 1964
A tape head is a type of transducer used in tape recorders to convert electrical signals to magnetic fluctuations and vice versa.They can also be used to read credit/debit/gift cards because the strip of magnetic tape on the back of a credit card stores data the same way that other magnetic tapes do.