Ads
related to: usb to 12v converter cable for generator to refrigerator in car
Search results
Results From The WOW.Com Content Network
The actual voltage, matching the car battery's voltage, will be approximately 12.5 volts when dormant (less in cold conditions), approximately 14.5 volts when the engine and the alternator/generator are operating (more when cold), and may briefly drop as low as 5–6 volts during engine start due to the high temporary battery current usage. [12]
The USB PD specification provides the ability for 5 V devices to draw more than (the USB battery-charging specification limit of) 7.5 W of power from USB "PD-aware" ports when using PD-aware USB cables. The specification also allows USB PD ports to provide even greater power at higher voltages over PD-aware cables – up to 36 W at 12 V and 60 ...
12 V and 24 V powered USB sockets, on an NCR cash register. PoweredUSB, also known as Retail USB, USB PlusPower, USB +Power, and USB Power Plus, [1] is an addition to the Universal Serial Bus standard that allows for higher-power devices to obtain power through their USB host instead of requiring an independent power supply or external AC adapter.
Whereas earlier USB cables had a host end A and a peripheral device end B, a USB-C cable connects either way; and for interoperation with older equipment, there are cables with a Type-C plug at one end and either a Type-A (host) or a Type-B (peripheral device) plug at the other. The designation "C" refers only to the connector's physical ...
The connectors are designed for 12V systems. Exceptions for the 7-pin connector may exist where they may be used for 6V and 24V. Vehicles and trailers with 6V systems can use the 7-pin or a 5-pin connector, but these are rare today. Heavy trucks that may have 12V systems are usually older (vintage vehicles) or on non-European markets. [1]
A simple voltage dropper can be used to reduce the voltage for low-power devices; if more than 12V is required, or for high-powered devices, a switched-mode power supply is used. The output will usually be DC in the range 1.5–24 V. Power supplies that output either 100–120 V AC or 210–240 V AC are available; they are called inverters ...