Ad
related to: recommended watts per square foot
Search results
Results From The WOW.Com Content Network
Space By Space Method. A defined list of many possible space types within a building the associated watts per square foot allowance. For example, ANSI/ASHRAE/IESNA Standard 90.1-2007 allows the Emergency Space of a hospital to be designed for 2.7 watts per square foot, but the Recovery areas of a hospital would be allowed 0.8 watts per square foot.
[8] [22] For example, “the allowable watts per square foot of lighting systems, and the minimum energy efficiencies required of mechanical systems.” [8] Performance-based codes are results-oriented, where compliance is predicated more on performing to a certain baseline of energy use.
ANSI/ASHRAE/IES Standard 90.1: Energy Standard for Buildings Except Low-Rise Residential Buildings is an American National Standards Institute (ANSI) standard published by ASHRAE and jointly sponsored by the Illuminating Engineering Society (IES) that provides minimum requirements for energy efficient designs for buildings except for low-rise residential buildings (i.e. single-family homes ...
Always base the size of your heater on your space, aiming for 10 watts per square foot. For example, if your space is 150 square feet, look for a model with 1,500 watt capacity.
The SI unit of irradiance is watts per square metre (W/m 2 = Wm −2). The unit of insolation often used in the solar power industry is kilowatt hours per square metre (kWh/m 2). [12] The Langley is an alternative unit of insolation. One Langley is one thermochemical calorie per square centimetre or 41,840 J/m 2. [13]
In the United States, a house built to passive house standard results in a building that requires space heating energy of 1 British thermal unit per square foot (11 kJ/m 2) per heating degree day, compared with about 5 to 15 BTU/sq ft (57 to 170 kJ/m 2) per heating degree day for a similar building built to meet the 2003 Model Energy Efficiency ...
kelvin square-metre per watt (K⋅m 2 /W or, equally, °C⋅m 2 /W), whereas the I-P (inch-pound) unit is degree Fahrenheit square-foot hour per British thermal unit (°F⋅ft 2 ⋅h/BTU). [13] For R-values there is no difference between U.S. and Imperial units, so the same I-P unit is used in both.
Although the concept of U-value (or U-factor) is universal, U-values can be expressed in different units. In most countries, U-value is expressed in SI units, as watts per square metre-kelvin: W/(m 2 ⋅K) In the United States, U-value is expressed as British thermal units (Btu) per hour-square feet-degrees Fahrenheit: Btu/(h⋅ft 2 ⋅°F)