Ads
related to: fixed speed wind turbine design
Search results
Results From The WOW.Com Content Network
An example of a wind turbine, this 3 bladed turbine is the classic design of modern wind turbines Wind turbine components : 1-Foundation, 2-Connection to the electric grid, 3-Tower, 4-Access ladder, 5-Wind orientation control (Yaw control), 6-Nacelle, 7-Generator, 8-Anemometer, 9-Electric or Mechanical Brake, 10-Gearbox, 11-Rotor blade, 12-Blade pitch control, 13-Rotor hub
IEC 61400 is a set of design requirements made to ensure that wind turbines are appropriately engineered against damage from hazards within the planned lifetime. The standard concerns most aspects of the turbine life from site conditions before construction, to turbine components being tested, [ 1 ] assembled and operated.
Originally, wind turbines were fixed speed. This has the benefit that the rotor speed in the generator is constant, so that the frequency of the AC voltage is fixed. This allows the wind turbine to be directly connected to a transmission system. However, from the figure above, we can see that the power coefficient is a function of the tip-speed ...
However, very high tip speeds also increase the drag on the blades, decreasing power production. Balancing these factors is what leads to most modern horizontal-axis wind turbines running at a tip speed ratio around 9. In addition, wind turbines usually limit the tip speed to around 80-90m/s due to leading edge erosion and high noise levels.
The generator, which is approximately 34% of the wind turbine cost, includes the electrical generator, [64] [65] the control electronics, and most likely a gearbox (e.g., planetary gear box), [66] adjustable-speed drive, or continuously variable transmission [67] component for converting the low-speed incoming rotation to high-speed rotation ...
Modern large wind turbines achieve peak values for C P in the range of 0.45 to 0.50, [2] [full citation needed] about 75–85% of the theoretically possible maximum. In high wind speed, where the turbine is operating at its rated power, the turbine rotates (pitches) its blades to lower C P to protect itself from damage.