Ads
related to: isc pipe hanging hardware brackets
Search results
Results From The WOW.Com Content Network
A pipe support or pipe hanger is a designed element that transfer the load from a pipe to the supporting structures. The load includes the weight of the pipe proper, the content that the pipe carries, all the pipe fittings attached to pipe, and the pipe covering such as insulation. The four main functions of a pipe support are to anchor, guide ...
The two holes are connected using hangers, a pair of connecting plates sandwiching the bridge girders. A pair of large steel pins through the plates and girder webbing provide the hinges, holding up the suspended span while allowing it to move longitudinally. Large washers are bolted to each end of the pin to retain the hangers.
The rigid pipe of the SCR forms a catenary between its hang-off point on the floating or rigid platform, and the seabed. [9] A free-hanging SCR assumes a shape roughly similar to the letter 'J'. A catenary of a Steel Lazy Wave Riser (SLWR) consists in fact of at least three catenary segments.
Holdown (holdown, hold-down, or hold down) or tie-down in structural engineering refers to the steel device or hardware that is installed at the end of a plywood shear wall. The hold downs provide uplift resistance against the overturning moment imposed on the wall due to "in-plane" lateral load applied at the top of the wall.
The first patent for Self-ligating bracket was filed by Charles E. Boyd in 1933. Willam F. ford in 1951 introduced another self-ligating bracket under Johnson Twin wire technique. In 1971, A. J. Wildman introduced the Edgelok bracket which was the first type of self-ligating bracket that enjoyed commercial success. All these brackets were ...
A pipe hitch is a hitch-type knot used to secure smooth cylindrical objects, [2] such as pipes, poles, beams, or spars. According to The Ashley Book of Knots , a pipe hitch is "used to lower a pipe or hoist one" [ 1 ] and as "another method of tying to a rectangular timber."