Search results
Results From The WOW.Com Content Network
The bore cross section areas "Q" used in the calculations were taken from the appropriate C.I.P. data sheets. The intermediate cartridges .30 Carbine , 7.92×33mm Kurz , 7.62×39mm , 7.62×45mm , 5.45×39mm , .223 Remington / 5.56×45mm NATO and 5.8×42mm stand out as having relatively low sub 8 O ratio's .
These are a measure of the standardized length of the barrel versus the rifled bore of the barrel. In other words, a 12/45 is 12"×45= the length of the rifled bore of that gun in inches. This explains the differences in both penetration and long range performance of various naval rifles over the years. [3] [4] [5] [6]
Most straight-pull rifles have a striker firing mechanism (without a hammer), [citation needed] and models using a hammer usually have a comparably longer lock time than hammer-less mechanisms. The Anschütz Fortner action used in biathlon is a good example of an ergonomical straight-pull rifle with good economy of motion and high operating speed.
A rifle is a firearm designed to be fired from the shoulder, with a barrel that has a helical groove or pattern of grooves ("rifling") cut into the barrel walls.The raised areas of the rifling are called "lands," which make contact with the projectile (for small arms usage, called a bullet), imparting spin around an axis corresponding to the orientation of the weapon.
Chamber illustration indicating the various sections of a typical rifle chamber. The freebore is the cyan colored section just ahead of the neck. In firearms, freebore (also free-bore, free bore, or throat) is the portion of the gun barrel between the chamber and the rifled section of the barrel bore. The freebore is located just forward of the ...
Rifling of a 105 mm Royal Ordnance L7 tank gun Conventional rifling of a 90 mm M75 cannon (production year 1891, Austria-Hungary) Rifling in a GAU-8 autocannon. Rifling is the term for helical grooves machined into the internal surface of a firearms's barrel for imparting a spin to a projectile to improve its aerodynamic stability and accuracy.
For example on an AR-type rifle, the mil-spec distance from center of bore to top of rail is 1.211 inches, or approximately 31 mm (1.2 in). The mount height itself, that is the distance from the top of rail to center of scope, varies, but typically lies around 36–38 mm (1.4–1.5 in) (higher and lower mounts are also readily available).
The M27 Infantry Automatic Rifle (IAR) is a 5.56mm, select-fire assault rifle / squad automatic weapon developed from the HK416 by Heckler & Koch. It is used by the United States Marine Corps (USMC) and was originally intended for automatic riflemen , [ 6 ] but now is issued to all infantry riflemen as a replacement for the M4 carbine .