Ads
related to: 1kw end fed hf antenna for sale amazongigaparts.com has been visited by 10K+ users in the past month
Search results
Results From The WOW.Com Content Network
An antenna such as the one described above is usable for both local and medium-long-distance communication across a frequency range of about 1:6 . For example, an antenna for the lower portion of shortwave (say, 3–18 MHz) will be roughly 33 m (110 feet) long, with conductors spaced 1 m (3.3 feet). For the higher portion of shortwave (5–30 ...
Often random wire antennas are also (inaccurately) referred to as long-wire antennas.There is no accepted minimum size, but actual long-wire antennas must be greater than at least a quarter-wavelength ( 1 / 4 λ) or perhaps greater than a half ( 1 / 2 λ) at the frequency the long wire antenna is used for, and even a half-wave may only be considered "long-ish" rather than "truly ...
AN/FLR-9 in Elmendorf, Alaska c. 1964. The AN/FLR-9 is a type of very large circularly disposed antenna array, built at eight locations during the Cold War for HF/DF direction finding of high priority targets.
A dipole can be fed from very near its end (needing to be only about 1 / 20 th of the dipole length from the actual end) but the end impedances are exceedingly high – a few thousands of ohms, depending on the average height of the antenna and thickness of its wire.
With a low power home station and a simple antenna, range would be around 50 km (30 miles). With a large antenna system like a long yagi, and higher power (typically 100 watts or more) contacts of around 1 000 km (600 miles) using the Morse code (CW) and single-sideband (SSB) modes are common. Ham operators seek to exploit the limits of the ...
The J-pole antenna is an end-fed omnidirectional half-wave antenna that is matched to the feedline by a shorted quarter-wave parallel transmission line stub. [5] [1] [6] For a transmitting antenna to operate efficiently, absorbing all the power provided by its feedline, the antenna must be impedance matched to the line; it must have a resistance equal to the feedline's characteristic impedance.