Search results
Results From The WOW.Com Content Network
Density is related to pressure by the ideal gas laws. Therefore, density will also decrease exponentially with height from a sea-level value of ρ 0 roughly equal to 1.2 kg⋅m −3. At an altitude over 100 km, the atmosphere is no longer well-mixed, and each chemical species has its own scale height.
At IUPAC standard temperature and pressure (0 °C and 100 kPa), dry air has a density of approximately 1.2754 kg/m 3. At 20 °C and 101.325 kPa, dry air has a density of 1.2041 kg/m 3. At 70 °F and 14.696 psi, dry air has a density of 0.074887 lb/ft 3.
Values of ρ b of b = 1 through b = 6 are obtained from the application of the appropriate member of the pair equations 1 and 2 for the case when h = h b+1. [ 2 ] In these equations, g 0 , M and R * are each single-valued constants, while ρ , L , T and h are multi-valued constants in accordance with the table below.
K) specific gas constant for dry air ρa = P_a / (Rs_a * Tair) return ρa end # Wet air density ρ [kg/m3] # Tair air temperature in [Kelvin] # P absolute atmospheric pressure [Pa] function wet_air_density (RH, Tair, P) es = water_vapor_saturated_pressure (Tair, P) e = es * RH / 100 ρv = water_vapor_density (e, Tair) ρa = dry_air_density (P-e ...
This must be done by integration. To get the column density, integrate the total column over a height. Per the definition of Dobson units, 1 DU = 0.01 mm of trace gas when compressed down to sea level at standard temperature and pressure. So integrating the number density of air from 0 to 0.01 mm, it becomes equal to 1 DU:
The density of air at sea level is about 1.2 kg/m 3 (1.2 g/L, 0.0012 g/cm 3). Density is not measured directly but is calculated from measurements of temperature, pressure and humidity using the equation of state for air (a form of the ideal gas law). Atmospheric density decreases as the altitude increases.
The tropospheric tabulation continues to 11,000 meters (36,089 ft), where the temperature has fallen to −56.5 °C (−69.7 °F), the pressure to 22,632 pascals (3.2825 psi), and the density to 0.3639 kilograms per cubic meter (0.02272 lb/cu ft). Between 11 km and 20 km, the temperature remains constant.
The relative density of gases is often measured with respect to dry air at a temperature of 20 °C and a pressure of 101.325 kPa absolute, which has a density of 1.205 kg/m 3. Relative density with respect to air can be obtained by =, where is the molar mass and the approximately equal sign is used because equality pertains only if 1 mol of the ...