Search results
Results From The WOW.Com Content Network
The 3.3 has a timing chain, and is an interference engine meaning that the valves will collide with the pistons in the event of a timing chain failure. Vehicles using the 3.3 include: 1990–1993 Dodge Dynasty, Chrysler New Yorker, Chrysler Imperial, (replaced the 3.0 L Mitsubishi 6G72 engine) 1990–2010 Chrysler minivans
The engine was revised for 1931 with 56 hp (42 kW) and 1932 with 65 hp (48 kW) for Plymouth only, Dodge continued with the 48 hp (36 kW) from 1931 to 1933. A small-bore version was developed for export markets in 1931, with a narrower bore which brought the RAC rating down from 21 to 15.6 hp.
The "GEN-3" engines were available in Jeep utility vehicles starting in 1971. [3] It is not the same as Chrysler's 360 V8. [ 4 ] Chrysler continued production of the AMC 360 engine after the 1987 buyout of AMC to power the full-size Jeep Wagoneer (SJ) SUV that was produced until 1991. [ 5 ]
For 1997, the 3.9 L engine's torque output was increased to 225 lb⋅ft (305 N⋅m), with a compression ratio of 9.1:1. [8] Firing order was 1-6-5-4-3-2. [8] This engine was last produced for the 2003 Dodge Dakota pickup. Starting in the 2004 model year, it was entirely withdrawn from production and replaced with the 3.7L PowerTech V6 engine.
The Chrysler Pentastar engine family is a series of aluminium (die-cast cylinder block) dual overhead cam 24-valve gasoline V6 engines introduced for the 2011 model year in Chrysler, Dodge, and Jeep vehicles. The engine was initially named "Phoenix," but the name was changed before the official launch due to a trademark conflict; the Pentastar ...
The 3.5 L engine was expanded to 4.0 L; 241.2 cu in (3,952 cc) for the 2007 Dodge Nitro and Chrysler Pacifica. Like its family members, this is a SOHC engine and was built in Trenton, Michigan. DaimlerChrysler reportedly spent $155 million to expand the Trenton plant to manufacture this engine. [2] Output of 4.0 engine:
The Polyspheric or Poly engines were V8 engines produced by Chrysler from 1955 to 1958 as lower-cost alternatives to the Hemi engines. [1] These engines were based on the Hemi engines, using the same blocks and crankshaft parts, but completely different cylinder heads, pushrods, exhaust manifolds and pistons.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.