Search results
Results From The WOW.Com Content Network
4), the perceived energy capacity of a small UPS product that has multiple DC outputs at different voltages but is simply listed with a single ampere-hour rating, e.g., 8800 mAh, would be exaggerated by a factor of 3.75 compared to that of a sealed 12-volt lead-acid battery where the ampere-hour rating, e.g., 7 Ah, is based on the total output ...
The watt, kilogram, joule, and the second are part of the International System of Units (SI). The hour is not, though it is accepted for use with the SI.Since a watt equals one joule per second and because one hour equals 3600 seconds, one watt-hour per kilogram can be expressed in SI units as 3600 joules per kilogram.
Its capacity at 250 mA drain is 1,700 mAh at 1.5 V, less than other chemistries, limited by the low efficiency of the step-down converter. [21] Some later Li-ion AA batteries advertise their capacity in milliwatt-hours (mWh) instead of the usual milliampere-hours (mAh), so a customer's attention is drawn to the figure, typically a claimed 3,000 ...
For example, an "overnight" charge, might consist of supplying a current equal to one tenth the ampere-hour rating (C/10) for 14–16 hours; that is, a 100 mAh battery takes 10 mA for 14 hours, for a total of 140 mAh to charge at this rate.
A graphing calculator is a class of hand-held calculator that is capable of plotting graphs and solving ... USB-rechargeable 3.7 V/2000 mAh/7.4 Wh Li-Ion, USB 2018 ...
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
The capacity of an alkaline battery is strongly dependent on the load. An AA-sized alkaline battery might have an effective capacity of 3000 mAh at low drain, but at a load of 1 ampere, which is common for digital cameras, the capacity could be as little as 700 mAh. [12]
In the case of devices that output a different voltage than the battery, it is the battery voltage (typically 3.7 V for Li-ion) that must be used to calculate rather than the device output (for example, usually 5.0 V for USB portable chargers). This results in a 500 mA USB device running for about 3.7 hours on a 2,500 mAh battery, not five hours.