When.com Web Search

Search results

  1. Results From The WOW.Com Content Network
  2. Fixture unit - Wikipedia

    en.wikipedia.org/wiki/Fixture_unit

    The relationship between gallons per minute (gpm) and fixture unit is not constant, but varies with the number of fixture units. For example, 1000 FU is equivalent to 220 US gallons per minute (0.014 m 3 /s) while 2000 FU represents only 330 US gallons per minute (0.021 m 3 /s), about 1.5 times the flow rate.

  3. Gasoline gallon equivalent - Wikipedia

    en.wikipedia.org/wiki/Gasoline_gallon_equivalent

    The energy content of ethanol is 76,100 BTU/US gal (5.89 kilowatt-hours per litre), compared to 114,100 BTU/US gal (8.83 kWh/L) for gasoline. (see chart above) A flex-fuel vehicle will experience about 76% of the fuel mileage MPG when using E85 (85% ethanol) products as compared to 100% gasoline.

  4. Cubic foot - Wikipedia

    en.wikipedia.org/wiki/Cubic_foot

    The cubic foot (symbol ft 3 or cu ft) [1] is an imperial and US customary (non-metric) unit of volume, used in the United States and the United Kingdom.It is defined as the volume of a cube with sides of one foot (0.3048 m) in length, or exactly 28.316 846 592 L, which is very close to ⁠ 1 / 35 ⁠ of a cubic metre).

  5. Comparison of the imperial and US customary measurement ...

    en.wikipedia.org/wiki/Comparison_of_the_imperial...

    Wine was measured with units based on the wine gallon of 231 cubic inches (3.785 L), while beer was measured with units based on an ale gallon of 282 cubic inches (4.621 L) and grain was measured with the Winchester measure, with a gallon of approximately 268.8 cubic inches (one eighth of a Winchester bushel or 4.405 L). In 1824, these units ...

  6. Million standard cubic feet per day - Wikipedia

    en.wikipedia.org/wiki/Million_standard_cubic...

    A related measure is "mega standard cubic metres per day" (MSm 3 /d), which is equal to 10 6 Sm 3 /d used in many countries outside the United States. [1] One MMSCFD equals 1177.6 Sm 3 /h. When converting to mass flowrate, the density of the gas should be used at Standard temperature and pressure.

  7. Standard cubic foot - Wikipedia

    en.wikipedia.org/wiki/Standard_cubic_foot

    Yet other definitions are in use for industrial gas, [5] where, in the US, a standard cubic foot for industrial gas use is defined at 70 °F (21.1 °C) and 14.696 psia (101.325 kPa), while in Canada, a standard cubic meter for industrial gas use is defined at 15 °C (59 °F) and 101.325 kPa (14.696 psia).

  8. Dry measure - Wikipedia

    en.wikipedia.org/wiki/Dry_measure

    In the US, the dry quart and dry pint are exactly ⁠ 15121 / 92400 ⁠ larger than their liquid counterparts, while the dry barrel is exactly ⁠ 1 / 33 ⁠ smaller than the fluid barrel, except for barrels of beer (dry barrels are exactly ⁠ 5 / 341 ⁠ smaller) and barrels of oil (dry barrels are exactly ⁠ 3 / 11 ⁠ smaller).

  9. Chlorodifluoromethane - Wikipedia

    en.wikipedia.org/wiki/Chlorodifluoromethane

    Chlorodifluoromethane or difluoromonochloromethane is a hydrochlorofluorocarbon (HCFC). This colorless gas is better known as HCFC-22, or R-22, or CHClF 2.It was commonly used as a propellant and refrigerant.