Ads
related to: dipole antenna purpose in the body
Search results
Results From The WOW.Com Content Network
The G5RV antenna is a dipole antenna fed indirectly, through a carefully chosen length of 300 Ω or 450 Ω twin lead, which acts as an impedance matching network to connect (through a balun) to a standard 50 Ω coaxial transmission line. The sloper antenna is a slanted vertical dipole antenna attached to the top of a single tower. The element ...
Antenna reactance may be removed using lumped elements, such as capacitors or inductors in the main path of current traversing the antenna, often near the feedpoint, or by incorporating capacitive or inductive structures into the conducting body of the antenna to cancel the feedpoint reactance – such as open-ended "spoke" radial wires, or ...
Inverted-'V' antenna When the two arms of a dipole are individually straight, but bent towards each other in a 'V' shape, at an angle noticeably less than 180°, the dipole is called a 'V' antenna, and when the dipole arms' end closer to the ground than their center branch-point, the antenna is called an inverted-'V' . The inverted-'V' is ...
Yagi antenna with one driven element (A) called a folded dipole, and 5 parasitic elements: one reflector (B) and 4 directors (C). The feed line leading to the receiver is not shown; it attaches to the driven element at D. The antenna radiates radio waves in a beam toward the right.
Ordinary types of antenna (half-wave dipoles and quarter-wave monopoles) cannot be built for such extremely long waves because of their size. A half wave dipole for 80 Hz would be 1162 miles long. So even the largest practical antennas for ELF frequencies are very electrically short, very much smaller than the wavelength of the waves they ...
An antenna emits polarized radio waves, with the polarization determined by the direction of the metal antenna elements. For example, a dipole antenna consists of two collinear metal rods. If the rods are horizontal, it radiates horizontally polarized radio waves, while if the rods are vertical, it radiates vertically polarized waves.
Indoor antennas are designed to be located on top of or next to the television set, but are ideally placed near a window in a room and as high up as possible for the best reception. [1] The most common types of indoor antennas are the dipole [2] ("rabbit ears"), which work best for VHF channels, and loop antennas, which work best for UHF. [3]
A 20-meter-long T²FD antenna, covering the 5-30 MHz band. The Tilted Terminated Folded Dipole (T²FD, T2FD, or TTFD) or Balanced Termination, Folded Dipole (BTFD) - also known as W3HH antenna - is a general-purpose shortwave antenna developed in the late 1940s by the United States Navy.