Search results
Results From The WOW.Com Content Network
RAID 0 (also known as a stripe set or striped volume) splits ("stripes") data evenly across two or more disks, without parity information, redundancy, or fault tolerance. Since RAID 0 provides no fault tolerance or redundancy, the failure of one drive will cause the entire array to fail, due to data being striped across all disks.
RAID 01, also called RAID 0+1, is a RAID level using a mirror of stripes, achieving both replication and sharing of data between disks. [3] The usable capacity of a RAID 01 array is the same as in a RAID 1 array made of the same drives, in which one half of the drives is used to mirror the other half.
The amount of data in one stride multiplied by the number of data disks in the array (i.e., stripe depth times stripe width, which in the geometrical analogy would yield an area) is sometimes called the stripe size or stripe width. [5] Wide striping occurs when chunks of data are spread across multiple arrays, possibly all the drives in the system.
RAID (/ r eɪ d /; redundant array of inexpensive disks or redundant array of independent disks) [1] [2] is a data storage virtualization technology that combines multiple physical data storage components into one or more logical units for the purposes of data redundancy, performance improvement, or both.
The four-drive example is identical to a standard RAID 1+0 array, while the three-drive example is a software implementation of RAID 1E. The two-drive example is equivalent to RAID 1. [13] The driver also supports a "far" layout, in which all the drives are divided into f sections. All the chunks are repeated in each section but are switched in ...
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
Xserve RAID. Xserve RAID is a attachment mass-storage server that was offered by Apple Inc. Xserve RAID held up to 14 hot-swappable Ultra-ATA hard drives, and had a capacity of 10.5 TB when filled with 750 GB modules. Xserve RAID supported RAID levels of 0, 0+1, 1, 3 and 5 in hardware, hybrid RAID levels such as 10 and 50 could be created in ...
The data on a RAID 1 volume is the same as on a normal partition. The RAID information is stored in the last 128kB of the partition. This means, to convert a RAID 1 volume to normal data partition, it is possible to decrease the partition size by 128kB and change the partition ID from fd to 83 (for Linux).