Search results
Results From The WOW.Com Content Network
A pattern set with 100% stuck-at fault coverage consists of tests to detect every possible stuck-at fault in a circuit. 100% stuck-at fault coverage does not necessarily guarantee high quality, since faults of many other kinds often occur (e.g. bridging faults, opens faults, delay faults).
Examples of TRV waveshapes. A transient recovery voltage (TRV) for high-voltage circuit breakers is the voltage that appears across the terminals after current interruption. It is a critical parameter for fault interruption by a high-voltage circuit breaker, its characteristics (amplitude, rate of rise) can lead either to a successful current interruption or to a failure (called reignition or ...
Note: Repaired Unit Acceptance Testing performance data is also used to evaluate "in-family" performance. While a UUT may meet all other Acceptance Test pass/fail criteria, results which deviate significantly from other repaired units or from the original Production Unit Acceptance Test data shall require rejection of the UUT.
graph with an example of steps in a failure mode and effects analysis. Failure mode and effects analysis (FMEA; often written with "failure modes" in plural) is the process of reviewing as many components, assemblies, and subsystems as possible to identify potential failure modes in a system and their causes and effects.
Wafer testing is a step performed during semiconductor device fabrication after back end of line (BEOL) and before IC packaging.. Two types of testing are typically done. Very basic wafer parametric tests (WPT) are performed at a few locations on each wafer to ensure the wafer fabrication process has been carried out successfully.
A fault-tolerant computer system can be achieved at the internal component level, at the system level (multiple machines), or site level (replication).. One would normally deploy a load balancer to ensure high availability for a server cluster at the system level. [3]
Snell & Wilcox SW2 and SW4 "Zone Plate" Test Chart (also referred to as Snell & Wilcox Test Pattern) were TV test cards introduced in the 1990s and used with NTSC, PAL and SDTV systems. [1] Popular versions of the test charts were made available on Laserdisc and DVD-Video, allowing home users and professionals to test and calibrate their equipment.
In engineering, a fail-safe is a design feature or practice that, in the event of a failure of the design feature, inherently responds in a way that will cause minimal or no harm to other equipment, to the environment or to people.