When.com Web Search

  1. Ad

    related to: subset of 36 9 or 7 wire to make 6 mm cord

Search results

  1. Results From The WOW.Com Content Network
  2. IEC 60309 - Wikipedia

    en.wikipedia.org/wiki/IEC_60309

    On the male plug, three 6 mm pins each 20.5 mm long are equally spaced around a 15.4 mm diameter circle, starting at the 12-o'clock position. They are surrounded by a 23 mm long shroud with an inner diameter of 36 mm and an outer diameter of 42 mm.

  3. AC power plugs and sockets: British and related types

    en.wikipedia.org/wiki/AC_power_plugs_and_sockets:...

    The important socket dimensions which the standard does specify are: A minimum insertion of 9.6 mm from the face of the socket-outlet to the first point of contact with a live part, [67] a minimum distance of 9.5 mm from the line and neutral apertures to the periphery of the socket face, [68] and not to exceed dimensions for the apertures of 7. ...

  4. NEMA connector - Wikipedia

    en.wikipedia.org/wiki/NEMA_connector

    All NEMA 6 devices are three-wire grounding devices (hot-hot-ground) used for 208 and 240 V circuits and rated for 250 V maximum, with the 6-15, 6-20 and 6-30 being grounding versions of the 2-15, 2-20 and 2-30, respectively. The 6-15 resembles the 5-15, but with collinear horizontal pins, spaced 23 ⁄ 32 in (18.3 mm) center-to-center. The 20 ...

  5. Litz wire - Wikipedia

    en.wikipedia.org/wiki/Litz_wire

    Litz wire is used for the helix and variometer in both helix houses. It consists of 9 × 5 × 5 × 27 (totaling 6,075) strands of #36 AWG (0.127 mm [0.0050 in] diameter) magnet wire and multiple layers of cotton, hemp, and plastic insulation, in a cable 19 mm (3 ⁄ 4 inch) in diameter, totaling 151,875 circular mils (0.7695619839 cm 2) of ...

  6. D-subminiature - Wikipedia

    en.wikipedia.org/wiki/D-subminiature

    The contacts in each row of these connectors are spaced 326/3000 of an inch apart, or approximately 0.1087 inches (2.76 mm), and the rows are spaced 0.112 inches (2.84 mm) apart; the pins in the two rows are offset by half the distance between adjacent contacts in a row. [7]

  7. Modular connector - Wikipedia

    en.wikipedia.org/wiki/Modular_connector

    The height of the plug's insertion area is 0.260 inches (6.60 mm) and the contacts are 0.040 inches (1.02 mm) apart (contact pitch), so the width is dependent on the number of pin positions. [ 7 ] [ 8 ] However, not all plugs from all manufacturers have this capability, and some jack manufacturers warn that their jacks are not designed to ...

  8. Power cord - Wikipedia

    en.wikipedia.org/wiki/Power_cord

    A power cord, line cord, or mains cable is an electrical cable that temporarily connects an appliance to the mains electricity supply via a wall socket or extension cord. The terms are generally used for cables using a power plug to connect to a single-phase alternating current power source at the local line voltage (generally 100 to 240 volts ...

  9. Thermoplastic-sheathed cable - Wikipedia

    en.wikipedia.org/wiki/Thermoplastic-sheathed_cable

    Orange: 10 AWG wire (5.26 mm 2) for 30-amp circuits Black: 6 or 8 AWG wire (13.3 mm 2 or 8.37 mm 2) for 60- and 45-amp circuits, respectively Grey: usage for underground installations, designated as "underground feeder" (UF) cables [4] The outer jacket is labeled with letters that show how many insulated wires are concealed within the sheath ...