Search results
Results From The WOW.Com Content Network
The BNC connector is a miniature quick-connect ... BNC connectors were commonly used on 10base2 thin Ethernet network cables and network cards. BNC connections can ...
An attempt by Apple to deal with cable clutter, by combining five separate cables from computer to monitor. Female port (20-pin) Digital Flat Panel (DFP) Used with the PanelLink digital video protocol. Deprecated. Made obsolete by DVI. 3D model of a UDI connector Unified Display Interface: Proposed to replace both DVI and HDMI.
VIVO = Mini-DIN 9-pin with breakout cable. Digital and analog: Digital Visual Interface (DVI) DVI connector Video and audio: Analog: SCART (Peritel) SCART Digital: High-Definition Multimedia Interface (HDMI), BNC HDMI connector DisplayPort: DisplayPort connector HDBaseT: 8P8C connector IEEE 1394 "FireWire" FireWire or i.LINK connectors
The various serial digital interface standards all use (one or more) coaxial cables with BNC connectors, with a nominal impedance of 75 ohms. This is the same type of cable used in analog composite video setups, which potentially makes for easier "drop in" equipment upgrades (though may be necessary for long runs at the higher bitrates for older oxidising or lower grade of cable to replaced ...
The BNC connector, in turn, post dated the PL-259 connector featured on first-generation VCRs. Video cables are 75 ohm impedance, low in capacitance. Typical values run from 52 pF/m for an HDPE-foamed dielectric precision video cable to 69 pF/m for a solid PE dielectric cable. [11]
10BASE2 (also known as cheapernet, [1] thin Ethernet, thinnet, and thinwire) is a variant of Ethernet that uses thin coaxial cable terminated with BNC connectors to build a local area network. During the mid to late 1980s, this was the dominant 10 Mbit/s Ethernet standard.
Color-coded PS/2 connection ports (purple for keyboards and green for mice) on the rear of a personal computer An S-video connector: because this is a female connector, Pin 1 is at lower right
It is also possible to reuse existing coaxial cable when upgrading from an analogue to a digital camera system. The original connector for CoaXPress is a 75 Ω IEC 61169-8 BNC connector. The smaller DIN 1.0/2.3 connector was added in CoaXPress 1.1, and the Micro-BNC connector was then added to CoaXPress 2.0 for the new speeds faster than CXP-6 ...