Ads
related to: concrete sealer for basement walls- Moisture Barrier Install
Keep Your Basement Dry
Fast Installation by Local Pros
- Exterior Waterproofing
Stop Foundation Leaks Now
Keep Water Outside
- Waterproofing Pros
Affordable Solutions & Options
A Dry Basement You Can Afford
- Waterproofing Inspection
Get Immediate Advice & Stop Leaks
Years of Experience Trust the Pros
- Moisture Barrier Install
Search results
Results From The WOW.Com Content Network
Concrete sealers are applied to concrete to protect it from surface damage, corrosion, and staining. They either block the pores in the concrete to reduce absorption of water and salts or form an impermeable layer which prevents such materials from passing.
However, interior sealers are good for preventing high atmospheric humidity inside the basement from absorbing into the porous masonry and causing spalling. Spalling is a condition where constant high humidity or moisture breaks down masonry surfaces, causing deterioration and shedding of the concrete surfaces.
Masonry walls are built with a damp-proof course to prevent rising damp, and the concrete in foundations needs to be damp-proofed or waterproofed with a liquid coating, basement waterproofing membrane (even under the concrete slab floor where polyethylene sheeting is commonly used), or an additive to the concrete.
Integral damp proofing in concrete involves adding materials to the concrete mix to make the concrete itself impermeable. [ 4 ] Surface suppressant coating with thin water proof materials such as epoxy resin for resistance to non-pressurized moisture such as rain water or a coating of cement sprayed on such as shotcrete which can resist water ...
In the 17th century glazing putty was first used to seal window glass made with linseed oil and chalk, later other drying oils were also used to make oil-based putties. [4] In the 1920s, polymers such as acrylic polymers, butyl polymers and silicone polymers were first developed and used in sealants. By the 1960s, synthetic-polymer-based ...
In areas below foundation level (subgrade areas), particularly those formed in concrete, vapor retarder placement can be problematic, as moisture infiltration from capillary action can exceed water vapor movement outward through framed and insulated walls. A slab-on-grade or basement floor should be poured over a cross-laminated polyethylene ...