Search results
Results From The WOW.Com Content Network
An ICOM IC-7300 Radio Tuned to the 20 Meter Band. The ICOM IC-7300 is a multimode 6 meter, 4 meter (ITU Region 1 only) and HF base station amateur radio transceiver. [1] The IC-7300 was announced to the public at the Japan Ham Fair in 2015. [2] The radio has 100 watts output on CW, SSB, and FM modulations and 25 watts of output in AM. [3]
IQ imbalance is a performance-limiting issue in the design of a class of radio receivers known as direct conversion receivers. [a] These translate the received radio frequency (RF, or pass-band) signal directly from the carrier frequency to baseband using a single mixing stage.
Morse code is called the original digital mode. Radio telegraphy, designed for machine-to-machine communication is the direct on / off keying of a continuous wave carrier by Morse code symbols, often called amplitude-shift keying or ASK, may be considered to be an amplitude modulated mode of communications, and is rightfully considered the first digital data mode.
The highest DC power efficiency occurs when the time delta between PA Enable and the RF signal is minimized, but a short delay can exacerbate transient effects on the RF signal. Because the power-up/power-down operation of the PA can cause transient and thermal effects that degrade transmitter performance, another metric called Dynamic EVM is ...
Alarm indication signal (AIS) (also called all ones because of the data and framing pattern) is a signal transmitted by an intermediate element of a multi-node transport circuit that is part of a concatenated communications system to alert the receiving end of the circuit that a segment of the end-to-end link has failed at a logical or physical level, even if the system it is directly ...
The Icom IC-V82 is a VHF handheld transceiver with coverage in the two-meter band (144–146 MHz) and a maximum output power of 7 watts. [8] It was manufactured and sold by Icom from 2004 to 2014. [9] [10] [11] Following its discontinuation, Icom issued an advisory warning about counterfeit radios, including the IC-V82.
Error-correcting codes are used in lower-layer communication such as cellular network, high-speed fiber-optic communication and Wi-Fi, [11] [12] as well as for reliable storage in media such as flash memory, hard disk and RAM. [13] Error-correcting codes are usually distinguished between convolutional codes and block codes:
The SINCGARS operates on any of 2320 channels between 30 and 88 megahertz (MHz) with a channel separation of 25 kilohertz (kHz). It accepts either digital or analog inputs and superimposes the signal onto a radio frequency (RF) carrier wave. In FH mode, the input changes frequency about 100 times per second over portions of the tactical VHF-FM ...