Ads
related to: upstream usb port monitor driverpchelpsoft.com has been visited by 1M+ users in the past month
wiki-drivers.com has been visited by 100K+ users in the past month
Search results
Results From The WOW.Com Content Network
The USB4 specification speaks of downstream facing ports (DFP) and upstream facing ports (UFP) rather than host and peripheral ports. Downstream facing ports includes host ports as well as any "outputs" of a USB4 hub, while upstream facing ports include anything that is connectable to a downstream facing port, like the ports of peripherals or ...
The written USB 3.0 specification was released by Intel and its partners in August 2008. The first USB 3.0 controller chips were sampled by NEC in May 2009, [4] and the first products using the USB 3.0 specification arrived in January 2010. [5] USB 3.0 connectors are generally backward compatible, but include new wiring and full-duplex operation.
The OHCI driver provides low- and full-speed functions for USB ports of all other motherboard chipset vendors' integrated USB host controllers or discrete host controllers attached to the computer's expansion bus. The EHCI driver provided high-speed functions for USB ports on the motherboard or on the discrete USB controller.
Standard USB hub ports can provide from the typical 500 mA/2.5 W of current, only 100 mA from non-hub ports. USB 3.0 and USB On-The-Go supply 1.8 A/9.0 W (for dedicated battery charging, 1.5 A/7.5 W full bandwidth or 900 mA/4.5 W high bandwidth), while FireWire can in theory supply up to 60 watts of power, although 10 to 20 watts is more typical.
Network UPS Tools (NUT) is a suite of software component designed to monitor power devices, such as uninterruptible power supplies, power distribution units, solar controllers and servers power supply units. Many brands and models are supported and exposed via a network protocol and standardized interface.
A four-port "long cable" "external box" USB hub A four-port "compact design" USB hub: upstream and downstream ports shown. A USB hub is a device that expands a single Universal Serial Bus (USB) port into several so that there are more ports available to connect devices to a host system, similar to a power strip. All devices connected through a ...
To allow for voltage drops, the voltage at the host port, hub port, and device are specified to be at least 4.75 V, 4.4 V, and 4.35 V respectively by USB 2.0 for low-power devices, [a] but must be at least 4.75 V at all locations for high-power [b] devices (however, high-power devices are required to operate as a low-powered device so that they ...
The DL-41xx series came out in 2013. It is a USB 3.0 to LVDS device, supporting DL3 compression and HDCP 2.0 encryption. [26] It is designed to be embedded into monitors to enable USB as a video input on displays. It is described as a low-power device, which enables it to be powered from the USB bus without the need for an external power supply.