Search results
Results From The WOW.Com Content Network
† Although the mic input is usually mono, the input is still a TRS phone socket. Many mono 'computer' mics are fitted with TRS plugs. The tip is for the MIC and the ring is for power (to power an electret-condenser style MIC). There are exceptions to the above: Hosa cables use grey and orange for left and right analogue channels.
TOSLINK (Toshiba Link) [3] is a standardized [4] optical fiber connector system. [5] Generically known as optical audio, the most common use of the TOSLINK optical fiber connector is in consumer audio equipment in which the digital optical socket carries (transmits) a stream of digital audio signals from audio equipment (CD player, DVD player, Digital Audio Tape recorder, computer, video game ...
Optical Cabling 110 Ω STP 75 Ω coaxial 75 Ω coaxial Optical fibre: Connector 3-pin XLR: BNC: RCA or BNC: TOSLINK: Output level 2–7 V peak to peak 1.0–1.2 V peak to peak 0.5–0.6 V peak to peak — Min. input level 0.2 V 0.32 V 0.2 V — Max. distance 1000 m 100 m 10 m Modulation Biphase mark code: Subcode information ASCII id. text
A cable from the jack in the wall is attached to the input of the box, and an output cable from the box is attached to the television, usually the RF-IN or composite input on older TVs. Since the set-top box only decodes the single channel that is being watched, each television in the house requires a separate box.
The ASI output of a DVB Integrated Receiver/Decoder (IRD). It carries the entire MPEG transport stream being received from a DVB satellite feed entering the RF input (far left side in picture). Asynchronous Serial Interface, or ASI, is a method of carrying an MPEG Transport Stream over 75-ohm copper coaxial cable or optical fiber. [1]
Explore daily insights on the USA TODAY crossword puzzle by Sally Hoelscher. Uncover expert takes and answers in our crossword blog.
Also AM radio or AM. Used interchangeably with kilohertz (kHz) and medium wave. A modulation technique used in electronic communication where the amplitude (signal strength) of the wave is varied in proportion to that of the message signal. Developed in the early 1900s, this technique is most commonly used for transmitting an audio signal via a radio wave measured in kilohertz (kHz). See AM ...
The electro-optical transfer function (EOTF) is the transfer function having the picture or video signal as input and converting it into the linear light output of the display. [1] This is done within a display device. The opto-optical transfer function (OOTF) is the transfer function having the scene light as input and the displayed light as ...