Ads
related to: kreg pocket hole screw size chart
Search results
Results From The WOW.Com Content Network
Using a pocket hole jig also makes for a cleaner and neater appearance as opposed to creating a pocket hole without the help of a jig. [2] A pocket hole jig is generally made of plastic and has a metal insert that the drill bit is inserted through to drill the hole.
Example (inch, coarse): For size 7 ⁄ 16 (this is the diameter of the intended screw in fraction form)-14 (this is the number of threads per inch; 14 is considered coarse), 0.437 in × 0.85 = 0.371 in. Therefore, a size 7 ⁄ 16 screw (7 ⁄ 16 ≈ 0.437) with 14 threads per inch (coarse) needs a tap drill with a diameter of about 0.371 inches.
Nominal (thread) sizes range from 0.1875 to 0.375 in (4.763 to 9.525 mm) and lengths from 1.25 to 5 in (32 to 127 mm). Typically an installer uses a hammer drill to make a pilot hole for each concrete screw and a powered impact driver to drive the screw. The drill hole should be 1/2" longer than the depth penetration of the screw.
US tap and drill bit size and reference chart [7] Machine screw size Number of threads per inch (TPI) Major diameter Minor diameter Tap drills Clearance drill 75% thread for aluminum, brass, & plastics 50% thread for steel, stainless, & iron Close fit Free fit Drill size Decimal equiv. Drill size Decimal equiv. Drill size Decimal equiv. Drill size
Number drill bit gauge sizes range from size 80 (the smallest) to size 1 (the largest) followed by letter gauge size A (the smallest) to size Z (the largest). Although the ASME B94.11M twist drill standard, for example, lists sizes as small as size 97, sizes smaller than 80 are rarely encountered in practice.
The metric screw tap and clearance sizes are largely missing, and those clearance hole sizes that are present are more often incorrect; e.g. M5 x 0.8 has 5.1 mm as close fit, but this would be an interference fit, all sources have 5.3 mm. (0.1 mm is below the sum of surface roughness and tolerance of the screw and clearance drill diameter ...