Ads
related to: french polishing with shellac finish paint kit reviews
Search results
Results From The WOW.Com Content Network
French polish is a process, not a material. The main material is shellac, although there are several other shellac-based finishes, not all of which classify as French polishing. The French polish technique is an effective method to accent exotic wood grain. The finish is softer than modern varnishes and lacquers, and is particularly sensitive ...
Often, a final coat of wax is applied over the finish to add a degree of protection. French polishing is a finishing method of applying many thin coats of shellac using a rubbing pad, yielding a very fine glossy finish. Ammonia fuming is a traditional process for darkening and enriching the color of white oak.
in alcohol solution as sanding sealer, widely sold to seal sanded surfaces, typically wooden surfaces before a final coat of a more durable finish. Similar to French polish but more dilute. [57] as a topcoat in nail polish (although not all nail polish sold as "shellac" contains shellac, and some nail polish not labelled in this way does).
In terms of modern finishing products, finishes based on shellac dissolved in alcohol are often called shellac or lac to distinguish them from synthetic lacquer, often called simply lacquer, which consists of synthetic polymers (such as nitrocellulose, cellulose acetate butyrate ("CAB"), or acrylic resin) dissolved in lacquer thinner, a mixture ...
The source of shellac resin is a brittle or flaky secretion of the female lac insect, Kerria lacca, found in the forests of Assam and Thailand and harvested from the bark of the trees where she deposits it to provide a sticky hold on the trunk. Shellac is the basis of French polish, which for centuries has been the preferred finish for fine ...
Japanning is most often a heavy black lacquer, almost like enamel paint. Black is common, and japanning is often synonymous with black japanning. The European technique uses varnishes that have a resin base, similar to shellac, applied in heat-dried layers which are then polished, to give a smooth glossy finish. It can also come in reds, greens ...
The production of lacquerware involves a process of applying a ground layer, [6] oftentimes lacquer mixed with other substances such as clay or a layer of fabric, followed by many very thin layers of processed lacquer to a substrate, typically wood, and allowing them to dry completely, [6] then curing and polishing.
#7 Finish. A #7 finish is produced by polishing with a 280–320 grit belt or wheel and sisal buffing with a cut and color compound. This is a semi-bright finish that will still have some polishing lines but they will be very dull. Carbon steel and iron are commonly polished to a #7 finish before chrome plating.