Ads
related to: sodium silicate gel uses
Search results
Results From The WOW.Com Content Network
Sodium silicate may be used for various paints and coatings, such as those used on welding rods. Such coatings can be cured in two ways. One method is to heat a thin layer of sodium silicate into a gel and then into a hard film. To make the coating water-resistant, high temperatures of 100 °C (212 °F; 373 K) are needed. [16]
An aqueous solution of sodium silicate is acidified to produce a gelatinous precipitate that is washed, then dehydrated to produce colorless silica gel. [6] When a visible indication of the moisture content of the silica gel is required, ammonium tetrachlorocobaltate(II) (NH 4 ) 2 [CoCl 4 ] or cobalt(II) chloride CoCl 2 is added. [ 6 ]
Sodium Metasilicate reacts with acids to produce silica gel. [6] Cements and Binders - dehydrated sodium metasilicate forms cement or binding agent. Pulp and Par - sizing agent and buffer/stabilizing agent when mixed with hydrogen peroxide. Soaps and Detergents - as an emulsifying and suspension agent.
A pallet of precipitated amorphous silica paper bags used as reinforcing filler in formulation. Precipitated silica is an amorphous form of silica (silicon dioxide, SiO 2); it is a white, powdery material. Precipitated silica is produced by precipitation from a solution containing silicate salts.
When the sodium silicate gel forms and swells inside a porous siliceous aggregate, it first expands and occupies the free porosity. When this latter is completely filled, and if the soluble but very viscous gel cannot be easily expelled from the silica network, the hydraulic pressure rises inside the attacked aggregate and leads to its fracture.
For premium support please call: 800-290-4726 more ways to reach us
This gel can come in handy during cold and flu season and in extremely germy situations like hospitals, medical clinics, and doctors offices. And while dermatologists recommend you don’t overuse ...
The subunits of colloidal silica particles are typically in the range of 1 to 5 nm. Whether or not these subunits are joined depends on the conditions of polymerization. Initial acidification of a water-glass (sodium silicate) solution yields Si(OH) 4. If the pH is reduced below 7 or if salt is added, then the units tend to fuse together in chains.