Search results
Results From The WOW.Com Content Network
The use of petroleum contaminated soils for aggregate material is widespread. Aggregate dryers may either be stationary or mobile. Soil treatment capacities range from 25-150 tons per hour. The soil may be incorporated into the asphalt as a recycling process or the treated soil may be used for other purposes.
Treatment capacities can range from 2 to 30 tons per hour for transportable units. Direct-fired rotary desorbers have been used extensively over the years for petroleum contaminated soils and soils contaminated with Resource Conservation and Recovery Act hazardous wastes as defined by the United States Environmental Protection Agency. A 1992 ...
Municipal and industrial wastes contribute most to soil contamination (38%), followed by the industrial/commercial sector (34%). Mineral oil and heavy metals are the main contaminants contributing around 60% to soil contamination. In terms of budget, the management of contaminated sites is estimated to cost around 6 billion Euros (€) annually ...
S/S technologies were used to treat a contaminated former wood treating facility in Port Newark, New Jersey. Approximately 8 acres (32,000 m 2) of soil was contaminated by wood with arsenic, chromium, and polycyclic aromatic hydrocarbons. 8% of Portland cement was used by wet weight of contaminated soil. Both in situ and ex situ processes were ...
Land spreading costs are typically $2.50 to $3.00 per barrel of water-based drilling fluids not contaminated with oil, and they could be higher for oily wastes containing salts (Bansal and Sugiarto 1999). Costs also depend on sampling and analytical requirements.
Polycyclic aromatic hydrocarbons concentrations of soil samples taken from contaminated oil drilling cuttings in Nigeria have been decreased by 7% to 19% using white rot fungi under experimental conditions. [28] Soil contaminated with crude oil displays toxic levels of various heavy metals such as lead, zinc and magnesium.
Landfarming is an ex situ waste treatment process that is performed in the upper soil zone or in biotreatment cells. Contaminated soils , sediments , or sludges are transported to the landfarming site, mixed into the soil surface and periodically turned over ( tilled ) to aerate the mixture. [ 1 ]
Deep soil mixing requires specialized auger mixing equipment. In order to apply this method in-situ and in deep soil, the oxidant must be pumped to the point of mixing using a kelly bar (a piece of earth drilling equipment), or appropriate piping to the place where the soil needs to be oxidized. The soil then has to be mixed by using mixing blades.