When.com Web Search

  1. Ads

    related to: spar urethane finish non gloss spray adhesive pads for walls

Search results

  1. Results From The WOW.Com Content Network
  2. Spar varnish - Wikipedia

    en.wikipedia.org/wiki/Spar_varnish

    Originally, spar varnish was a "long oil" varnish, composed primarily of drying oil with a small proportion of resin, usually boiled linseed oil and rosin. [1] This gave flexibility, [ 2 ] even though its weather resistance was still poor, and thus re-coating was required relatively frequently.

  3. Wood finishing - Wikipedia

    en.wikipedia.org/wiki/Wood_finishing

    French polishing is a finishing method of applying many thin coats of shellac using a rubbing pad, yielding a very fine glossy finish. Ammonia fuming is a traditional process for darkening and enriching the color of white oak. Ammonia fumes react with the natural tannins in the wood and cause it to change colours. [28]

  4. Varnish - Wikipedia

    en.wikipedia.org/wiki/Varnish

    Lacquer is typically sprayed on, within a spray booth that evacuates overspray and minimizes the risk of combustion. The rule of thumb is that a clear wood finish formulated to be sprayed is a lacquer, but if it is formulated to be brushed on then it is a varnish. Thus, by far most pieces of wooden furniture are lacquered. [citation needed]

  5. Wallpaper paste - Wikipedia

    en.wikipedia.org/wiki/Wallpaper_paste

    Adhesive flakes that are mixed with water to produce wallpaper paste. Wallpaper adhesive or wallpaper paste is a specific adhesive, based on modified starch, methylcellulose, or clay [1] which is used to fix wallpaper to walls. [2] Wallpaper pastes have a typical shear thinning viscosity and a high wet adhesive tack.

  6. Enamel paint - Wikipedia

    en.wikipedia.org/wiki/Enamel_paint

    Spray can with enamel paint. Enamel paint is paint that air-dries to a hard, usually glossy, finish, used for coating surfaces that are outdoors or otherwise subject to hard wear or variations in temperature; it should not be confused with decorated objects in "painted enamel", where vitreous enamel is applied with brushes and fired in a kiln.

  7. Moisture cure polyurethane - Wikipedia

    en.wikipedia.org/wiki/Moisture_cure_polyurethane

    Moisture cured polyurethane–urea coatings have been made by reacting 1,2,3-triazole rich polyether polyols with HMDI at NCO/OH eq. ratio of 1.2 to obtain isocyanate-terminated polyurethane prepolymers. The prepolymers were cured under atmospheric moisture to make polyurethane–urea free films.