Search results
Results From The WOW.Com Content Network
Limewater is a saturated aqueous solution of calcium hydroxide. Calcium hydroxide is sparsely soluble at room temperature in water (1.5 g/L at 25 °C [23]). "Pure" (i.e. less than or fully saturated) limewater is clear and colorless, with a slight earthy smell and an astringent/bitter taste. It is basic in nature with a pH of 12.4.
This page provides supplementary chemical data on calcium hydroxide. Material Safety Data Sheet The handling of this chemical may incur notable safety precautions ...
Calcium hydroxide has a high enough pH to turn the phenolphthalein a vivid purplish-pink color, thus indicating the presence of water. Chemical pulping: Calcium oxide is used to make calcium hydroxide, which is used to regenerate sodium hydroxide from sodium carbonate in the chemical recovery at kraft pulp mills.
An example is when slaked lime (calcium hydroxide) is mixed into a thick slurry with sand and water to form mortar for building purposes. When the masonry has been laid, the slaked lime in the mortar slowly begins to react with carbon dioxide to form calcium carbonate (limestone) according to the reaction: Ca(OH) 2 + CO 2 → CaCO 3 + H 2 O.
When pH slowly drops due to the progress of the silica dissolution reaction, the solubility of calcium hydroxide increases, and the alkali gel reacts with Ca 2+ ions. Its viscosity increases due to gelation process and its mobility (fluidity) strongly decreases when C-S-H phases start to precipitate after reaction with calcium hydroxide ...
This process is often irreversible. Sufficient amount of free calcium ion and a high pH of 12 and above is needed to initiate and maintain the pozzolanic reaction. [2] This is because at a pH of around 12, the solubility of silicon and aluminium ions is high enough to support the pozzolanic reaction.
A solution or suspension of calcium hydroxide is known as limewater and can be used to test for the weak acid carbon dioxide. The reaction Ca(OH) 2 + CO 2 ⇌ Ca 2+ + HCO − 3 + OH − illustrates the basicity of calcium hydroxide. Soda lime, which is a mixture of the strong bases NaOH and KOH with Ca(OH) 2, is used as a CO 2 absorbent.
The carbonatation process is used in the production of sugar from sugar beets.It involves the introduction of limewater (milk of lime - calcium hydroxide suspension) and carbon dioxide enriched gas into the "raw juice" (the sugar rich liquid prepared from the diffusion stage of the process) to form calcium carbonate and precipitate impurities that are then removed.