Search results
Results From The WOW.Com Content Network
Distressing is viewed as a refinishing technique although it is the opposite of finishing in a traditional sense. In distressing, the object's finish is intentionally destroyed or manipulated to look less than perfect, such as with sandpaper or paint stripper. For example, the artisan often removes some but not all of the paint, leaving proof ...
Chasing (French: ciselure) or embossing is a similar technique in which the piece is hammered on the front side, sinking the metal. The two techniques are often used in conjunction. Many metals can be used for chasing and repoussé work, including gold, silver, copper, and alloys such as steel, bronze, and pewter.
French polishing a table. French polishing is a wood finishing technique that results in a very high gloss surface, with a deep colour and chatoyancy.French polishing consists of applying many thin coats of shellac dissolved in denatured alcohol using a rubbing pad lubricated with one of a variety of oils.
It is built with corner post construction on the ground floor, half-timbered style of timber framing on the upper floor and has a less common style of wood roof shingles than typical in America. American historic carpentry is the historic methods with which wooden buildings were built in what is now the United States since European settlement.
Gilding is a decorative technique for applying a very thin coating of gold over solid surfaces such as metal (most common), wood, porcelain, or stone. [1] A gilded object is also described as "gilt". Where metal is gilded, the metal below was traditionally silver in the West, to make silver-gilt (or vermeil ) objects, but gilt-bronze is ...
Japanning is a type of finish that originated as a European imitation of East Asian lacquerwork. It was first used on furniture, but was later much used on small items in metal. The word originated in the 17th century. American work, except in the carriage and early automobile industries, is more often called toleware. [1]
Finishing the piece will require fine abrasive paper, always backed by a sanding block. Choices of sealers and finishes that can be applied include ordinary varnish, special varnishes, polyurethane (either oil or water based), wax, and French polish. Sand shading is a process used to make a picture appear to be more three-dimensional.
Tumble finishing, also known as tumbling or rumbling, [1] is a technique for smoothing and polishing a rough surface on relatively small parts. In the field of metalworking , a similar process called barreling , or barrel finishing , [ 2 ] works upon the same principles.