Search results
Results From The WOW.Com Content Network
Assorted SO-DIMM Modules A 200-pin PC2-5300 DDR2 SO-DIMM. A 204-pin PC3-10600 DDR3 SO-DIMM. A SO-DIMM slot on a computer motherboard. A SO-DIMM (pronounced "so dim" / ˈ s oʊ d ɪ m /, also spelled SODIMM) or small outline DIMM, is a smaller alternative to a DIMM, being roughly half the physical size of a regular DIMM. The first SO-DIMMs had ...
Registered (Buffered) DIMM (R-DIMM or RDIMM) modules insert a buffer between the pins of the command and address buses on the DIMM and the memory chips. A high-capacity DIMM might have numerous memory chips, each of which must receive the memory address, and their combined input capacitance limits the speed at which the memory bus can operate.
2 40 tebi Ti tera + binary: (2 10) 4 = 1 099 511 627 776 tera: (10 3) 4 The JEDEC DDR3 SDRAM standard JESD-79-3f uses Mb and Gb to specify binary memory capacity: [ 7 ] " The purpose of this Standard is to define the minimum set of requirements for JEDEC compliant 512 Mb through 8 Gb for x4, x8, and x16 DDR3 SDRAM devices.
Additionally, the thickness of DDR4 modules has been increased to 1.2 mm from 1.0 mm to support more signal layers, enhancing overall performance and reliability. [53] DDR4 DIMM modules have a slightly curved edge connector so not all of the pins are engaged at the same time during module insertion, lowering the insertion force.
Two types of DIMMs (dual in-line memory modules): a 168-pin SDRAM module (top) and a 184-pin DDR SDRAM module (bottom). Memory modules of SK Hynix. In computing, a memory module or RAM stick is a printed circuit board on which memory integrated circuits are mounted.
Memory controller with differential serial connections to DDR2 FB-DIMMs. The AMB is visible in the center of each DIMM. A Fully Buffered DIMM (FB-DIMM) is a type of memory module used in computer systems. It is designed to improve memory performance and capacity by allowing multiple memory modules to be each connected to the memory controller ...
In computing, serial presence detect (SPD) is a standardized way to automatically access information about a memory module.Earlier 72-pin SIMMs included five pins that provided five bits of parallel presence detect (PPD) data, but the 168-pin DIMM standard changed to a serial presence detect to encode more information.
The number of physical DRAMs depends on their individual widths. For example, a rank of ×8 (8-bit wide) DRAMs would consist of eight physical chips (nine if ECC is supported), but a rank of ×4 (4-bit wide) DRAMs would consist of 16 physical chips (18, if ECC is supported). Multiple ranks can coexist on a single DIMM.