Search results
Results From The WOW.Com Content Network
Usually, the mould is formed from aluminum or steel, but sometimes composite molds are used. The two sides fit together to make a mould cavity. The distinctive feature of resin transfer moulding is that the reinforcement materials are placed into this cavity, and before the introduction of the matrix material, the mould set is closed.
Vacuum Assisted Resin Transfer Molding (VARTM) or Vacuum Injected Molding (VIM) is a closed mold, out of autoclave (OOA) [1] composite manufacturing process. VARTM is a variation of Resin Transfer Molding (RTM) with its distinguishing characteristic being the replacement of the top portion of a mold tool with a vacuum bag and the use of a vacuum to assist in resin flow. [2]
Transfer molding (BrE: transfer moulding) is a manufacturing process in which casting material is forced into a mold. Transfer molding is different from compression molding in that the mold is enclosed [ 1 ] rather than open to the fill plunger resulting in higher dimensional tolerances and less environmental impact. [ 2 ]
What sets SQRTM apart from standard resin transfer molding is the substitution of a prepreg layup rather than a dry fiber preform. [3] SQRTM is an RTM process adapted to prepreg technology. The prepreg is placed in a closed mold and during the cure cycle, a small amount of resin is injected into the cavity through ports positioned around the part.
Similar to the methods performed in resin transfer molding, Light RTM involves a closed mold process. A vacuum holds mold A and mold B together to result in two finished sides with fixed thickness levels. Vacuum rings around the tools hold the molds together for this process after dry fiber reinforcements are loaded into mold A before joining ...
The difference comes from the application of the fibre and resin material to the mould. Spray-up is an open-moulding composites fabrication process where resin and reinforcements are sprayed onto a reusable mould. The resin and glass may be applied separately or simultaneously "chopped" in a combined stream from a chopper gun.
Glass fiber-reinforced composites comprise the largest segment into which UPRs are used and can be processed via SMC, BMC, pultrusion, cured-in-place pipe (known as relining in Europe), filament winding, vacuum molding, spray-up molding, resin transfer molding (RTM). Wind turbine blades also use them [9] as well as many more processes.
Language links are at the top of the page. Search. Search