Search results
Results From The WOW.Com Content Network
The Ithaca Mag-10 was the world’s first 10 GA semi-automatic gas-operated shotgun chambered in 10-gauge (3½"). The CounterCoil system built into the front of the magazine tube reduced the recoil from the round to allow easier second shots but cut the magazine size in half to 2 shells.
The least popular sizes are the 10 gauge and the 16 gauge; while far less common than the other four gauges, they are still commercially available. [citation needed] [9] Shotguns and shells exceeding 10 gauge, such as the 8 gauge, 6 gauge, 4 gauge, and 2 gauge are historically important in the United Kingdom and elsewhere in mainland Europe ...
The Remington Model SP-10 is a gas-operated semi-automatic shotgun chambered for 10 gauge 3 + 1 ⁄ 2-inch (8.9 cm) Magnum shells. It was produced by Remington Arms from 1989 to 2010. [ 3 ] The design was based on the Ithaca Mag-10 .
The Remington Model 10 is a pump-action shotgun designed in 1908 by John Pedersen for Remington Arms. [2] It has an internal striker within the bolt and a tube magazine which loaded and ejected from a port in the bottom of the receiver. [5] An updated version, the Model 29, was introduced in 1930 with improvements made by C.C. Loomis. [3]
Both 10 and 12-gauge models were offered in the Model 1887; 12-gauge variants used a 2 5/8" shell, 10-gauge variants fired a 2 7/8" shell. [2] The standard barrel length was 30" with 32" available as a special order. In 1888 a 20" barrelled version could be ordered and Winchester offered the shotguns with Damascus barrels. [2]
Originally, the Model 10 was sold to law enforcement only. The concept of this shotgun was quite interesting to many police agencies who adopted the Model 10 in the late 1960s and early 1970s; however, most of the agencies found many shortcomings, and ultimately ceased using the Model 10. The most common problem was the failure to cycle correctly.
The difference between a 1 and 2 gauge bore, however, is 25%. This is a significant amount, so it makes sense to have a division in between. This source lists loading data for punt guns of 1 to 1 1/4 inch (4 5/8 to 2 3/8 gauge), 1 3/8 to 1 1/2 inch (1 3/4 to 1 3/8 gauge), and 1 5/8 to 1 3/4 inch bore (1 gauge to 1 1/8 pounder). If there were no ...
Ten and a quarter inch gauge (or X scale) (10 + 1 ⁄ 4 in / 260 mm) is a large modelling scale, generally only used for ridable miniature railways. Model railways at this scale normally confine the scale modelling aspects to the reproduction of the locomotive and with steam locomotives the accompanying tender .