Ad
related to: thread angles chart printable version
Search results
Results From The WOW.Com Content Network
Diagram of a thread angle. In mechanical engineering, the thread angle of a screw is the included angle between the thread flanks, measured in a plane containing the thread axis. [1] This is a defining factor for the shape of a screw thread. Standard values include:
The Thury thread form had the crests rounded at 1 / 6 p and the roots rounded at 1 / 5 p so the thread angle was close to 47.5° but not exactly. This was simplified in the BA thread definition by defining the thread angle to be 47.5° exactly and the thread form to be symmetrical with a depth of 3 / 5 p.
Knuckle threads with a flat 30 degree flank thread angle are standardized in DIN 405 for inch pitches and diameters ranging from 8 mm to 200 mm. [3] A more recent standard DIN 20400 uses metric thread pitch and lists diameters from 10 mm to 300 mm. [4] As DIN is a German organization, many instances of the DIN thread charts [5] write numbers with a comma as the decimal marker.
Whitworth's new standard specified a 55° thread angle and a thread depth of 0.640327p and a radius of 0.137329p, where p is the pitch. The thread pitch increases with diameter in steps specified on a chart. The Whitworth thread system was later to be adopted as a British Standard to become British Standard Whitworth (BSW).
The included angle characteristic of the cross-sectional shape is often called the thread angle. For most V-threads, this is standardized as 60 degrees, but any angle can be used. The cross section to measure this angle lies on a plane which includes the axis of the cylinder or cone on which the thread is produced.
Each thread is characterized by its major diameter, D (D maj in the diagram), and its pitch, P. ISO metric threads consist of a symmetric V-shaped thread. In the plane of the thread axis, the flanks of the V have an angle of 60° to each other. The thread depth is 0.54125 × pitch.
The thread form follows the British Standard Whitworth standard: Symmetrical V-thread in which the angle between the flanks is 55° (measured in an axial plane) One-sixth of this sharp V is truncated at the top and the bottom; The threads are rounded equally at crests and roots by circular arcs ending tangentially with the flanks where r ≈ 0 ...
The standard designation for a UTS thread is a number indicating the nominal (major) diameter of the thread, followed by the pitch measured in threads per inch.For diameters smaller than 1 / 4 inch, the diameter is indicated by an integer number defined in the standard; for all other diameters, the inch figure is given.