Search results
Results From The WOW.Com Content Network
Energy efficiency is expressed in terms of fuel economy: [2] distance per vehicle per unit fuel volume; e.g., km/L or miles per gallon (US or imperial). distance per vehicle per unit fuel mass; e.g., km/kg. [11] distance per vehicle per unit energy; e.g., miles per gallon equivalent (mpg-e).
[6] [7] Miles per gallon equivalent cost for alternate fuel can be calculated with a simple conversion to the conventional mpg (miles per gallon, miles/gal). See conversion to MPG by cost below. The MPGe metric was introduced in November 2010 by EPA in the Monroney sticker of the Nissan Leaf electric car and the Chevrolet Volt plug-in hybrid.
The displayed fuel economy is 18.1 km/L (5.5 L/100 km; 43 mpg ‑US). A Briggs and Stratton Flyer from 1916. Originally an experiment in creating a fuel-saving automobile in the United States, the vehicle weighed only 135 lb (61.2 kg) and was an adaptation of a small gasoline engine originally designed to power a bicycle.
The energy content of ethanol is 76,100 BTU/US gal (5.89 kilowatt-hours per litre), compared to 114,100 BTU/US gal (8.83 kWh/L) for gasoline. (see chart above) A flex-fuel vehicle will experience about 76% of the fuel mileage MPG when using E85 (85% ethanol) products as compared to 100% gasoline. Simple calculations of the BTU values of the ...
Fuel consumption monitor from a 2006 Honda Airwave.The displayed fuel economy is 18.1 km/L (5.5 L/100 km; 43 mpg ‑US). A Briggs and Stratton Flyer from 1916. Originally an experiment in creating a fuel-saving automobile in the United States, the vehicle weighed only 135 lb (61.2 kg) and was an adaptation of a small gasoline engine originally designed to power a bicycle.
Charles Nelson Pogue (15 September 1897 – 1985) was a Canadian mechanic and inventor who in the 1930s filed a series of US patents for a miracle carburetor (sometimes called the Winnipeg carburetor [1]) that would allegedly enable a car to attain 200 miles per US gallon (1.2 L/100 km; 240 mpg ‑imp); it was described as a vaporising carburetor or sometimes a catalytic carburetor.
According to Primus Green Energy, the STG+ process converts natural gas into 90+-octane gasoline at approximately 5 US gallons per million British thermal units (65 litres per megawatt-hour). [4] The energy content of gasoline is 120,000 to 125,000 British thermal units per US gallon (9.3 to 9.7 kilowatt-hours per litre), making this process ...
Later systems collect oil in a sump, from where it can be collected and pumped around the engine again, usually after rudimentary filtering. This system has long been the norm for larger internal combustion engines. A pumped oil system can use higher oil pressures and so makes the use of hydrostatic bearings easier. These gave a greater load ...