Search results
Results From The WOW.Com Content Network
2 cm – approximate width of an adult human finger; 2.54 cm – 1 inch; 3.08568 cm – 1 attoparsec; 3.4 cm – length of a quail egg [113] 3.5 cm – width of film commonly used in motion pictures and still photography; 3.78 cm – amount of distance the Moon moves away from Earth each year [114] 4.3 cm – minimum diameter of a golf ball [115]
The Charrière is measured by the ''outer'' diameter, and is defined as 1 Fr = 1/3 mm, and thus 1 mm = 3 Fr; therefore the diameter of a round catheter in millimetres can be determined by dividing the French size by 3. [2] The French units roughly correspond to the outer circumference of the catheter (see table below).
Subdivisions of an inch are typically written using dyadic fractions with odd number numerators; for example, two and three-eighths of an inch would be written as 2 + 3 / 8 ″ and not as 2.375″ nor as 2 + 6 / 16 ″. However, for engineering purposes fractions are commonly given to three or four places of decimals and have been ...
The development of the 'Tessar' lens is discussed by Nasse, [11] and shows its transformation from an f /6.3 lens for plate cameras using the original three-group configuration through to an f /2.8 5.2 mm four-element optic with eight extremely aspheric surfaces, economically manufacturable because of its small size. Its performance is 'better ...
It is expressed as two numbers separated by a colon (x:y), where x corresponds to the width and y to the height. Common aspect ratios for displays, past and present, include 5:4, 4:3, 16:10, and 16:9. To distinguish: The display aspect ratio (DAR) is calculated from the physical width and height of a display, measured each in inch or cm ...
For example, 17 × 8.5 × +35 designates a diameter of 17 inches, width of 8.5 inches, and +35 mm positive offset (432 × 216 × +35 in fully metric numbers). Replacing the wheels on a car with larger ones can involve using tires with a lower profile.
On 2D displays, such as computer monitors and TVs, display size or viewable image size (VIS) refers to the physical size of the area where pictures and videos are displayed. The size of a screen is usually described by the length of its diagonal , which is the distance between opposite corners, typically measured in inches.
As well as 1 ⁄ 4 in (6.4 mm) tape, studio and multitrack machines use tape widths of 1 ⁄ 2, 1, and 2 inches (12.7, 25.4, and 50.8 mm), and at least one 3 inches (76.2 mm) [citation needed] machine was available for a time. There is also a 35 mm width, but this variety is more similar to the motion picture stock of the same width. It is ...