Search results
Results From The WOW.Com Content Network
Device configuration overlay (DCO) is a hidden area on many of today's hard disk drives (HDDs). Usually when information is stored in either the DCO or host protected area (HPA), it is not accessible by the BIOS (or UEFI), OS, or the user.
When this occurs, the drive may appear to be limited in size (e.g. 128 GB), which can look like a BIOS or dynamic drive overlay (DDO) problem. In this case, one must use software utilities (see below) that use READ NATIVE MAX ADDRESS and SET MAX ADDRESS to change the drive's reported size back to its native size, and avoid using the external ...
The SAS is a new generation serial communication protocol for devices designed to allow for much higher speed data transfers and is compatible with SATA. SAS uses a mechanically identical data and power connector to standard 3.5-inch SATA1/SATA2 HDDs, and many server-oriented SAS RAID controllers are also capable of addressing SATA hard drives.
The ThinkPad X series is a line of notebook computers and convertible tablets produced by Lenovo as part of the ThinkPad family. The ThinkPad X series is traditionally the range best designed for mobile use, with ultraportable sizes and less power compared to the flagship ThinkPad T series. [2]
Compaq Armada laptop from the late 1990s Apple MacBook Air, an "ultraportable" laptop weighing under 3.0 lb (1.36 kg) A Lenovo IdeaPad laptop Lenovo's ThinkPad business laptop, originally an IBM product Asus Transformer Pad, a hybrid tablet, powered by Android OS Microsoft Surface Pro 3, 2-in-1 detachable Alienware gaming laptop with backlit ...
Advanced Configuration and Power Interface (ACPI) is an open standard that operating systems can use to discover and configure computer hardware components, to perform power management (e.g. putting unused hardware components to sleep), auto configuration (e.g. Plug and Play and hot swapping), and status monitoring.
When booting in a true UEFI environment the Option ROM is not used as a SataDriver with the RST version takes over. In BIOS mode the legacy/BIOS booting is under CSMCORE. In true UEFI mode the RST is controlled under SataDriver / RstVmdDriver in BIOS. The Intel RAID ROM is the firmware in the motherboard BIOS that is used to create the RAID array.
Prior to version 7, Microsoft Windows did not take any specific measures to support solid state drives. From Windows 7, the standard NTFS file system provides support for the TRIM command. [198] By default, Windows 7 and newer versions execute TRIM commands automatically if the device is detected to be a solid-state drive.