Search results
Results From The WOW.Com Content Network
The Dynamic Host Configuration Protocol version 6 (DHCPv6) is a network protocol for configuring Internet Protocol version 6 (IPv6) hosts with IP addresses, IP prefixes, default route, local segment MTU, and other configuration data required to operate in an IPv6 network.
IPv6 hosts configure themselves automatically. Every interface has a self-generated link-local address and, when connected to a network, conflict resolution is performed and routers provide network prefixes via router advertisements. [19] Stateless configuration of routers can be achieved with a special router renumbering protocol. [20]
In IPv4, typical configuration protocols include DHCP or PPP. Although DHCPv6 exists, IPv6 hosts normally use the Neighbor Discovery Protocol to create a globally routable unicast address: the host sends router solicitation requests and an IPv6 router responds with a prefix assignment. [47]
The Neighbor Discovery Protocol (NDP), or simply Neighbor Discovery (ND), is a protocol of the Internet protocol suite used with Internet Protocol Version 6 (IPv6). [1]: §1 It operates at the internet layer of the Internet model, [2] and is responsible for gathering various information required for network communication, including the configuration of local connections and the domain name ...
The Internet Engineering Task Force (IETF) has reserved the IPv4 address block 169.254.0.0 / 16 (169.254.0.0 – 169.254.255.255) for link-local addressing. [1] The entire range may be used for this purpose, except for the first 256 and last 256 addresses (169.254.0.0 / 24 and 169.254.255.0 / 24), which are reserved for future use and must not be selected by a host using this dynamic ...
The Router Advertisement Daemon is used by system administrators in stateless autoconfiguration(RFC 4862. [ 3 ] ) methods of network hosts on Internet Protocol version 6 networks. When IPv6 hosts configure their network interface controllers , they multicast router solicitation (RS) requests onto the network to discover available routers.
Since it would not be practical to manually provision networks at scale, in IPv6 networking, DHCPv6 prefix delegation (RFC 3633; RFC 8415 § 6.3) is used to assign a network address prefix and automate configuration and provisioning of the public routable addresses for the network. In the typical case of a home network, for example, the home ...
Non-broadcast multi-access, with the use of designated routers. May need static configuration. Packets are sent as unicast. Point-to-multipoint, where OSPF treats neighbours as a collection of point-to-point links. No designated router is elected. Separate hello packets are sent to each neighbor.