Ads
related to: am fm radio stereo system
Search results
Results From The WOW.Com Content Network
The systems all did this in similar (but not completely compatible) ways. As with FM stereo, all of the AM stereo designs used pilot tones (unheard parts of the broadcast signal) to alert the receiver electronics that a stereo signal was coming in and to switch the receiver into the proper decoding mode. [4]
The IF bandwidth was ±5 kHz, as the only goal at the time was to relay AM radio-quality audio. This transmission system used 75 μs audio pre-emphasis like the main monaural audio and subsequently the multiplexed stereo audio. In the late 1950s, several systems to add stereo to FM radio were considered by the FCC.
AM broadcasting is radio broadcasting using amplitude modulation (AM) transmissions. It was the first method developed for making audio radio transmissions, and is still used worldwide, primarily for medium wave (also known as "AM band") transmissions, but also on the longwave and shortwave radio bands.
Two types of modulation are used in analog radio broadcasting systems; AM and FM. In amplitude modulation (AM) the strength of the radio signal is varied by the audio signal. AM broadcasting is allowed in the AM broadcast bands which are between 148 and 283 kHz in the longwave range, and between 526 and 1706 kHz in the medium frequency (MF ...
FM audio for analog television channel 6 is broadcast at a carrier frequency of 87.75 MHz, and many radios can tune this low; full-power stations ceased analog operations in 2009 under FCC orders, but a very small amount of low-power stations are still operated solely for their right to use this frequency for broadcasting an FM audio carrier ...
Marantz 2050L AM/FM stereo tuner (USA; 1978-1980) [1]. In electronics and radio, a tuner is a type of receiver subsystem that receives RF transmissions, such as AM or FM broadcasts, and converts the selected carrier frequency into a form suitable for further processing or output, such as to an amplifier or loudspeaker.