Search results
Results From The WOW.Com Content Network
This volume of natural gas has the same energy content as one US gallon of gasoline (based on lower heating values: 900 BTU/cu ft (9.3 kWh/m 3) of natural gas and 114,000 BTU/US gal (8.8 kWh/L) for gasoline). [22] One GGE of CNG pressurized at 2,400 psi (17 MPa) is 0.77 cubic feet (22 litres; 5.8 US gallons).
The therm (symbol, thm) is a non-SI unit of heat energy equal to 100,000 British thermal units (BTU), [1] and approximately 105 megajoules, 29.3 kilowatt-hours, 25,200 kilocalories and 25.2 thermies. One therm is the energy content of approximately 100 cubic feet (2.83 cubic metres) of natural gas at standard temperature and pressure. However ...
kilowatt-hour per 100 kilometres: kilowatt-hours per 100 kilometres: kilowatt-hour per 100 kilometers: kilowatt-hours per 100 kilometers: MJ/km kWh/mi: Kilowatt-hour: kWh/100 mi: kW⋅h/100 mi: 22.3694: kilowatt-hour per 100 miles: kilowatt-hours per 100 miles: mpge: Miles per gallon gasoline equivalent: MJ/100 km: MJ/100 km: 10: megajoule per ...
Note that the m³ gas conversion factor takes into account a difference in the standard temperature base for measurement of gas volumes in metric and imperial units. The standard temperature for metric measurement is 15 degrees Celsius (i.e. 59 degrees Fahrenheit) while for English measurement the standard temperature is 60 °F.
The Wobbe index is expressed in MJ/Nm³ (where 'Nm³' indicates'm³ in Normal conditions), or sometimes in BTU/scf.In the case of natural gas (molar mass 17 g/mol), the typical heating value is around 39 MJ/Nm³ (1,050 BTU/scf) and the specific gravity is approximately 0.59, giving a typical Wobbe index of 51 MJ/Nm³ (1,367 BTU/scf).
Yet other definitions are in use for industrial gas, [5] where, in the US, a standard cubic foot for industrial gas use is defined at 70 °F (21.1 °C) and 14.696 psia (101.325 kPa), while in Canada, a standard cubic meter for industrial gas use is defined at 15 °C (59 °F) and 101.325 kPa (14.696 psia).
The value is necessarily approximate as various grades of oil and gas have slightly different heating values. If one considers the lower heating value instead of the higher heating value, the value for one BOE would be approximately 5.4 GJ (see tonne of oil equivalent). Typically 5,800 cubic feet of natural gas is equivalent to
For rough comparisons, one million Btu is approximately equal to a thousand cubic feet of natural gas. [8] Pipeline-quality gas has an energy value slightly higher than that of pure methane, which has 10.47 kilowatt-hours per cubic metre (1,012 British thermal units per cubic foot).