Search results
Results From The WOW.Com Content Network
Radial run-out is caused by the tool being translated off the machine axis, still parallel. Radial run-out will measure the same all along the machine axis. Axial run-out is caused by the tool or component being at an angle to the axis. Axial run-out causes the tip of the tool or shaft to rotate off-centre relative to the base.
Machining is a manufacturing process where a desired shape or part is created using the controlled removal of material, most often metal, from a larger piece of raw material by cutting. Machining is a form of subtractive manufacturing , [ 1 ] which utilizes machine tools , in contrast to additive manufacturing (e.g. 3D printing ), which uses ...
It attempts to get really close to the finalized shape. Traditionally it's the first major operation in the machining process. Contouring/Profiling: this is a process used to mill different surfaces such as flat or irregular ones. This type of process can be done during the roughing or finishing phase of the overall operation. [3]
Radial (solid and colored lines) and circumferential roads (dashed and gray lines) in Metro Manila's road network. Axial – along the center of a round body, or the axis of rotation of a body; Radial – along a direction pointing along a radius from the center of an object, or perpendicular to a curved path.
Lead is the axial advance of a helix gear tooth during one complete turn (360°), that is, the Lead is the axial travel (length along the axle) for one single complete helical revolution about the pitch diameter of the gear. Lead angle is 90° to the helix angle between the helical tooth face and an equivalent spur tooth face.
Milling is the process of machining using rotary cutters to remove material [1] by advancing a cutter into a workpiece. This may be done by varying directions [ 2 ] on one or several axes, cutter head speed, and pressure. [ 3 ]
Turning is a metal cutting process for producing a cylindrical surface with a single point tool. The workpiece is rotated on a spindle and the cutting tool is fed into it radially, axially or both. Producing surfaces perpendicular to the workpiece axis is called facing. Producing surfaces using both radial and axial feeds is called profiling. [13]
Cutting speed may be defined as the rate at the workpiece surface, irrespective of the machining operation used. A cutting speed for mild steel of 100 ft/min is the same whether it is the speed of the cutter passing over the workpiece, such as in a turning operation, or the speed of the cutter moving past a workpiece, such as in a milling operation.