Search results
Results From The WOW.Com Content Network
The Pan-American television frequencies are different for terrestrial and cable television systems. Terrestrial television channels are divided into two bands: the VHF band which comprises channels 2 through 13 and occupies frequencies between 54 and 216 MHz, and the UHF band, which comprises channels 14 through 36 and occupies frequencies between 470 and 608 MHz.
FM channel 200, 87.9 MHz, overlaps TV 6. This is used only by K200AA.; TV 6 analog audio can be heard on FM 87.75 on most broadcast radio receivers as well as on a European TV tuned to channel E4A or channel IC, but at lower volume than wideband FM broadcast stations, because of the lower deviation.
The original allocation of channels consisted of only channels 1 to 28 with 50 kHz spacing between channels, and the second frequency for full-duplex operation 4.6 MHz higher. Improvements in radio technology later meant that the channel spacing could be reduced to 25 kHz with channels 60 to 88 interspersed between the original channels.
Channel 6 (VHF) 1928 Still on air 24 21 Mechanical Television: ATSC: 2XAF (Upgrade of WGY) WRGB-TV: Schenectady, New York: General Electric: 380 m 31.4 MHz Channel 6 (VHF) 1928 Still on air 24 21 Mechanical Television: ATSC: 2XAD (upgrade of W2XAF above) WRGB-TV: Schenectady, New York: General Electric: Channel 6 (VHF) 21.96 MHz Channel 6 (VHF ...
Very high frequency (VHF) is the ITU designation [1] [2] [3] for the range of radio frequency electromagnetic waves (radio waves) from 30 to 300 megahertz (MHz), with corresponding wavelengths of ten meters to one meter.
High Frequency (HF) (3 to 30 MHz) see Table of amateur MF and HF bandplans; Very High Frequency (VHF) (30 to 300 MHz) 8 metres (39.9 to 40.7 MHz), Republic of Ireland, Slovenia and South Africa. Beacons in UK and Denmark; 6 metres (50 to 52/54 MHz) 5 metres (59.5 to 60.1 MHz), Republic of Ireland. The Beacon in UK
Amateur use of VHF and UHF allocations exploded in the late 1960s and early 1970s as repeaters started going on the air. Repeater use sparked a huge interest in the 2-meter and 70-centimeter (420–450 MHz) bands; however, this interest never fully found its way into the 1.25-meter band.
Band III is the name of the range of radio frequencies within the very high frequency (VHF) part of the electromagnetic spectrum from 174 to 240 megahertz (MHz). It is primarily used for radio and television broadcasting. It is also called high-band VHF, in contrast to Bands I and II.