When.com Web Search

  1. Ads

    related to: iso grade oil viscosity chart

Search results

  1. Results From The WOW.Com Content Network
  2. SAE J300 - Wikipedia

    en.wikipedia.org/wiki/SAE_J300

    But SAE also allows designating an oil with two viscosity grades, referred to as a multi-grade oil. For example, 10W-30 designates a common multi-grade oil. A 10W-30 oil must pass the SAE J300 viscosity grade requirements for both 10W and 30, and all limitations placed on the viscosity grades, such as the requirement that a 10W oil must fail ...

  3. Viscosity index - Wikipedia

    en.wikipedia.org/wiki/Viscosity_index

    where U is the oil's kinematic viscosity at 40 °C (104 °F), Y is the oil's kinematic viscosity at 100 °C (212 °F), and L and H are the viscosities at 40 °C for two hypothetical oils of VI 0 and 100 respectively, having the same viscosity at 100 °C as the oil whose VI we are trying to determine.

  4. Motor oil - Wikipedia

    en.wikipedia.org/wiki/Motor_oil

    The grades include single grades, such as SAE 30, and also multi-grades such as SAE 15W-30. A multi-grade consists of a winter grade specifying the viscosity at cold temperatures and a non-winter grade specifying the viscosity at operating temperatures. An engine oil using a polymeric viscosity index improver (VII) must be classified as multi ...

  5. Hydraulic fluid - Wikipedia

    en.wikipedia.org/wiki/Hydraulic_fluid

    Commonly used hydraulic oil viscosities fall under the ISO VG (Viscosity Grade) classification system, which is based on the oil’s kinematic viscosity at 40°C (104°F). The most prevalent grades for general industrial and mobile hydraulic systems are typically: ISO VG 32; ISO VG 46; ISO VG 68

  6. List of viscosities - Wikipedia

    en.wikipedia.org/wiki/List_of_viscosities

    Consequently, if a liquid has dynamic viscosity of n centiPoise, and its density is not too different from that of water, then its kinematic viscosity is around n centiStokes. For gas, the dynamic viscosity is usually in the range of 10 to 20 microPascal-seconds, or 0.01 to 0.02 centiPoise. The density is usually on the order of 0.5 to 5 kg/m^3.

  7. NLGI consistency number - Wikipedia

    en.wikipedia.org/wiki/NLGI_consistency_number

    Common greases are in the range 1 through 3. Those with a NLGI No. of 000 to 1 are used in low viscosity applications. Examples include enclosed gear drives operating at low speeds and open gearing. Grades 0, 1 and 2 are used in highly loaded gearing. Grades 1 through 4 are often used in rolling contact bearings. Greases with a higher number ...