Ads
related to: 2 modems on same network with 3
Search results
Results From The WOW.Com Content Network
Transmit network packets based on a hash of the packet's source and destination. The default algorithm only considers MAC addresses (layer2). Newer versions allow selection of additional policies based on IP addresses (layer2+3) and TCP/UDP port numbers (layer3+4). This selects the same NIC slave for each destination MAC address, IP address, or ...
From the network perspective, there are two options that provide flexibility when looking at deploying LWA - collocated and non-collocated. In the former, the WLAN Access Point (AP) or Access Controller (AC) is physically integrated with the LTE eNB, whereas in the latter the WLAN network (i.e. APs and/or ACs) are connected to the LTE eNB via an external network interface (Xw).
Link segments can be 10BASE-T, 10BASE-FL or 10BASE-FB. This rule is also designated the 5-4-3-2-1 rule with there being two link segments (without senders) and one collision domain. [3] An alternate configuration rule, known as the Ethernet way, allows 2 repeaters on the single network and does not allow any hosts on the connection between ...
A layer-3 segment in an IP network is called a subnetwork, formed by all nodes sharing the same network prefix as defined by their IP addresses and the network mask. [5] Communication between layer-3 subnets requires a router. Hosts on a subnet communicate directly using the layer-2 segment that connects them.
A leased line modem also uses ordinary phone wiring, like dial-up and DSL, but does not use the same network topology. While dial-up uses a normal phone line and connects through the telephone switching system, and DSL uses a normal phone line but connects to equipment at the telco central office, leased lines do not terminate at the telco.
This compact modem’s ace up its sleeve is its ability to use its 1 Gbps and 2.5 Gbps ethernet ports simultaneously, provided you have two static IP addresses to play with.
Upstream: Upstream data uses QPSK or 16-level QAM (16-QAM) for DOCSIS 1.x, while QPSK, 8-QAM, 16-QAM, 32-QAM, and 64-QAM are used for DOCSIS 2.0 and 3.0. DOCSIS 2.0 and 3.0 also support 128-QAM with trellis coded modulation in S-CDMA mode (with an effective spectral efficiency equivalent to that of 64-QAM). DOCSIS 3.1 supports data modulations ...
The main advantage of layer-3 switches is the potential for lower network latency as a packet can be routed without making extra network hops to a router. For example, connecting two distinct segments (e.g. VLANs) with a router to a standard layer-2 switch requires passing the frame to the switch (first L2 hop), then to the router (second L2 ...