Search results
Results From The WOW.Com Content Network
Between 45% and 55% RH, static builds up at reduced levels, while humidity above 55% RH ensures that static will never build up. [11] The American Society of Heating, Refrigerating and Air Conditioning Engineers ( ASHRAE ) has traditionally recommended a range of 45–55% RH in data centers to prevent sparks that can damage IT equipment. [ 12 ]
Small pumps have tanks that range from 2 to 4 liters (0.5 to 1 gallon) and are usually supported using the flanges on their tanks or simply placed upon the floor. A plastic impeller in a molded volute at the bottom of the pump provides the pumping action; this impeller is connected to the motor via a metal shaft that extends downwards from the ...
UFAD systems use an underfloor supply plenum located between the structural concrete slab and a raised floor system to supply conditioned air to supply outlets (usually floor diffusers), located at or near floor level within the occupied space. Air returns from the room at ceiling level or the maximum allowable height above the occupied zone.
Condensation is the change of the state of matter from the gas phase into the liquid phase, and is the reverse of vaporization. The word most often refers to the water cycle . [ 1 ] It can also be defined as the change in the state of water vapor to liquid water when in contact with a liquid or solid surface or cloud condensation nuclei within ...
Interstitial condensation is a type of condensation that may occur within an enclosed wall, roof or floor cavity structure, which can create dampening. When moisture-laden air at dew point temperature penetrates inside a cavity of the structure, it condenses into liquid water on that surface. The moisture laden air can penetrate into hidden ...
Products using condensation technology have traditionally used a cold surface where humidity in warm air is condensed. Today, warm condensation technology, based on the concept of over-saturated steam inside a closed environment, [clarification needed] makes it possible to dehumidify air at sub-zero temperatures. This is a very energy-efficient ...
A heating degree day is a unit that measures how often outdoor daily dry-bulb temperatures fall below an assumed base, normally 18 °C (65 °F). [4] For building in most parts of North America, where winter heating conditions predominate, vapor barrier are placed toward the interior, heated side of insulation in the assembly.
Structural dampness is the presence of unwanted moisture in the structure of a building, either the result of intrusion from outside or condensation from within the structure. A high proportion of damp problems in buildings are caused by ambient climate dependent factors of condensation and rain penetration. [1]