Ads
related to: 2 way indoor amplifier splitter antenna for home phone and tv speaker
Search results
Results From The WOW.Com Content Network
Loudspeakers are often classified as "N-way", where N is the number of drivers in the system. For instance, a loudspeaker with a woofer and a tweeter is a 2-way loudspeaker system. An N-way loudspeaker usually has an N-way crossover to divide the signal among the drivers. A 2-way crossover consists of a low-pass and a high-pass filter.
The equaliser, connected between pre-amplifier output and power amplifier input, effectively flattens the speaker frequency response. [26] Each speaker has nine identical 4-inch drivers per channel — one on the front for direct sound, and eight on the rear designed to produce reflected sound. [23] [27]
A 10 dB 1.7–2.2 GHz directional coupler. From left to right: input, coupled, isolated (terminated with a load), and transmitted port. A 3 dB 2.0–4.2 GHz power divider/combiner. Power dividers (also power splitters and, when used in reverse, power combiners) and directional couplers are passive devices used
Bi-amping - An active crossover with two amplifiers.. Bi-amping and tri-amping is the practice of using two or three audio amplifiers respectively to amplify different audio frequency ranges, with the amplified signals being routed to different speaker drivers, such as woofers, subwoofers and tweeters.
The dish antenna occupies the high frequencies (typically 950 to 1450 MHz), and the TV antenna uses lower television channel frequencies (typically 50 to 870 MHz). In addition, the satellite also gets a DC to low frequency band to power the dish's block converter and select the dish antenna polarization (e.g., voltage signaling or DiSEqC ).
The system consists of a master antenna and a matching transformer to match the balanced antenna with unbalanced cable and amplifiers. [5] Most antennas have an impedance of around 300 Ω. To convert it to 75 Ω, a matching transformer (or balun) is used. For trunk line isolation, a resistive inductive device known as a splitter is used.